Overview
The Rubicon Express dual steering stabilizer bracket kit mounts two 36 mm monotube steering stabilizers on a direct axle bolt-on bracket. It is designed to help reduce steering vibration and wear on steering components. The kit includes Grade 8 hardware and is made in the USA.
The bracket is a direct fit for 2 and 4-door models. Confirm the year, make and model of your vehicle before buying. The stabilizers are not included in the kit.
Key features
- Mounts dual 36 mm monotube steering stabilizers
- Direct axle bolt-on design
- Grade 8 hardware included
- Powder coat finish that resists scratches and corrosion
- 2 and 4-door models listed
- Made in the USA
Dual stabilizer setup
Running two stabilizers splits the steering load across both sides of the axle, which is why dual setups are common on heavier builds. The bracket has to hold the stabilizers square to the axle, so the mounting surfaces need to be clean and flat before bolting it on. Check that the stabilizers sit parallel once mounted.
The steering geometry changes when stabilizers are added, so check the alignment and the tie rod position after the install. Look for clearance at full lock and watch for any contact with the axle or the frame. Retorque the Grade 8 hardware after the first few trail runs, since shock loads can loosen fasteners over time.
- Mount both stabilizers at the same angle
- Check steering alignment after the install
- Inspect the bracket and mounting points for cracks
Specifications
| Brand | Rubicon Express |
|---|---|
| UPC | 614901241839 |
| Stabilizer type | Dual, 36 mm monotube |
| Mounting | Direct axle bolt-on |
| Hardware | Grade 8 |
| Finish | Powder coat |
| Body style | 2 and 4-door |
| Fitment type | Direct fit (vehicles not named) |
Vehicle fitment
Verify your year, model and trim match the axle layout before you order, since the bracket is built around a particular axle.
The bracket is built around a particular axle layout, so the vehicle and axle type need to be confirmed. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bracket bolts directly to the axle, so the axle mounting points must be clean and clear before the install. Check the stabilizer clearance at full lock and the steering alignment after mounting the stabilizers.
What’s included
Dual stabilizer bracket kit with Grade 8 hardware. The steering stabilizers themselves are not part of the kit. Not included: the steering stabilizers themselves.

















