Overview
The Pro Comp Single Steering Stabilizer Bracket, part number 2509, is a mounting bracket kit for an ES2000 steering stabilizer shock. It is a mount-only kit with a single cylinder bracket and the mounting hardware.
The bracket covers older trucks and Jeeps from 1955 to 1993.
Key features
- Single cylinder bracket
- Mounting hardware included
- Mount-only kit, so the shock is a separate part
- Supplied boxed
Mounting an older shock
Mounting a stabilizer shock on an older truck or Jeep usually means working around frame rails and axle brackets that have seen years of road salt and heat. Clean the mounting surfaces to bare metal before fitting the bracket, and check for rust that could weaken the attachment. A bracket that sits flat against a clean surface holds better than one forced into place.
Because this kit is a mount only, the ES2000 shock must be chosen separately. Match the shock’s eye size and stroke to the bracket geometry before buying, and use the mounting hardware supplied rather than substitute bolts of a different grade. Recheck the torque after the first short drive, since older hardware can settle.
- Wire-brush mounting surfaces before installing
- Check frame and axle brackets for rust
- Match the shock eye size to the bracket
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 2509 |
| UPC | 614901030082 |
| Type | Mount only, single |
| Brackets | Included |
| Shock boot | Not included |
Vehicle fitment
This bracket fits these vehicles:
- 1969 to 1972 Chevrolet Blazer
- 1960 to 1973 Chevrolet K10 and 1960 to 1972 K20 pickups
- 1974 to 1993 Dodge Ramcharger
- 1959 to 1978 Ford F-250
- 1966 to 1972 GMC K15 and K25 pickups
- 1963 to 1969 Jeep Gladiator
Other models are included in the full list and are not all shown here. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One bracket with mounting hardware. Not included: the ES2000 steering shock.









