Overview
The Rancho Steering Stabilizer Bracket, part number RS64550, is a dual steering stabilizer bracket for the Ford F-250 and F-350 Super Duty. It fits 1999–2004 models in the Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
The bracket is built for two stabilizers. The hardware included with it is needed to complete installation on some Rancho stabilizers.
Key features
- Dual steering stabilizer configuration
- Mount hardware included
- Hardware needed for some Rancho stabilizer installs
Dual setups and stabilizer matching
Two stabilizers on one axle share the damping work, which can steady the steering on a heavy truck with larger tires. Each stabilizer needs its own mounting points, so the pair should be laid out before the bracket is bolted on. Check that both ends sit square, that the bushings are free of cracks, and that neither stabilizer binds at full steering lock.
Matching the parts matters as much as the layout. Confirm the stabilizer ends, bushings and spacers suit the bracket, and keep the hardware sets separate until the fit is checked. A dual setup adds load to the frame and axle mounts, so inspect those mounts regularly and replace any hardware that shows wear.
- Lay out both stabilizers before final tightening
- Check each end fitting for play
- Inspect mount points after rough trail use
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS64550 |
| Type | Dual steering stabilizer bracket |
| Configuration | Dual |
Vehicle fitment
It fits the 1999–2004 Ford F-250 Super Duty and F-350 Super Duty in the Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
Other Ford models, and years outside 1999–2004, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that your stabilizers are Rancho units that use this bracket before installing. The hardware is needed to finish the installation.







