Overview
The Rough Country 2″ Ford Leveling Lift Kit (part number R/C52230) is a bolt-on front spacer that gives 2 inches of lift to the 2009–2020 Ford F-150. The kit levels the front of the truck with the rear and is not for Raptor models.
The spacer is made from heavy-duty proprietary composite that Rough Country says will not rust or be affected by the elements. The kit also includes a set of rear blocks, and it is covered by Rough Country’s Lifetime Replacement Guarantee.
Key features
- 2 inches of front lift to level the truck
- Heavy-duty composite construction that does not rust
- Driver and passenger side pattern for upper control arm clearance
- No strut disassembly needed, per the product features
- Maintains factory ride quality
- Increased ground clearance at the front
- Rear blocks included
Tire size and front clearance
A two-inch front spacer changes the height of the upper control arm mounts, so tire clearance and wheel fit should be checked before the tires go on. The spacer is designed to work with the factory strut in place, which keeps the job simpler than a full suspension kit. Keeping the original fasteners in good condition helps the spacer seat evenly.
Heavier trucks and larger tires increase the load on the steering components and the front suspension, so inspection of ball joints and tie rod ends is a sensible step during installation. Re-torque the mounting hardware after the first few drives, and recheck the rear blocks for correct seating on the rear springs.
- Verify front-to-rear height after install
- Check tire rub at full steering lock
- Recheck fasteners after the first drives
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C52230 |
| Front lift | 2 inches |
| Maximum tire size | 33 inches |
| Material | Heavy-duty proprietary composite |
| Included | Spacers and a set of rear blocks |
| Warranty | Lifetime Replacement Guarantee |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2009–2020 Ford F-150 in FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, Police Responder, SSV, STX, XL and XLT models.
The Raptor is excluded from this kit, and the 2021 and newer F-150 are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The design allows the spacer to go on with the factory strut in place, using common hand tools. Re-check the front alignment after the spacer is in.
The spacer goes in with common tools and does not require strut disassembly. Check the front alignment after the spacers are in, and confirm the rear blocks match your rear springs before finishing.
The spacer is a leveling solution for a stock truck that sits nose-down. It also adds some front ground clearance, so the truck sits more level where the front is lowest.
What’s included
The front spacers and a set of rear blocks.















