Overview
The Rough Country 2.5″ Suspension Leveling Lift Kit (part number R/C57030) is a front leveling kit for the 2004–2008 Ford F-150. It has a 2.5-inch front lift from molded strut spacers and rear lift blocks with U-bolts.
The molded spacer is shaped to fit the strut hat, so it looks like a continuation of the strut instead of an exposed spacer. The kit includes N3 shocks.
Key features
- 2.5-inch front lift
- Molded strut spacer that fits the strut hat
- N3 shocks included
- Rear lift blocks and U-bolts
- Easy bolt-on installation
- Maintains factory ride quality.
Spacer installation tips
Strut spacers change the height of the front end without changing the strut itself, so the existing strut and its mounts are left in place. That makes the job simpler than a full strut replacement, but the spacer still moves the front geometry. After the install, the front alignment and the tightness of the rear U-bolts are the two checks that matter most.
Shocks matter when a truck is raised. A higher ride can put the shocks at a different angle, so the mounting points and extension should be checked before driving long distances. Worn bushings, tie rod ends and ball joints are good to inspect while the front is off the ground, since they carry more load after a lift.
Rear blocks often lift the rear to match the front. Check the rear driveline angle after the install, and recheck the U-bolts after the first few drives since they can settle. A truck with aged rear springs may need a closer look to keep the stance even.
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C57030 |
| Suspension type | Leveling kit |
| Front lift | 2.5 inches |
| Front lift method | Strut spacers |
| Rear lift method | Lift blocks and U-bolts |
| Lift height range | 0 to 3.5 inches |
| Front shocks | N3 shocks, included |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits the 2004–2008 Ford F-150 in the FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, 60th Anniversary Edition, XL and XLT models.
The 2009 and newer F-150 are not on this list, and neither are earlier F-150 generations. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The molded spacer sits on the strut hat, so the strut stays in place. Check the front alignment and the rear blocks’ U-bolt tightness after installation.
What’s included
Molded front strut spacers, N3 shocks, rear lift blocks and U-bolts.














