Overview
The RockJock 4×4 CE-9807FUA is a pair of adjustable length front upper control arms from the RockJock JK off-road suspension system, for the 2007–2018 Jeep Wrangler (JK). The arms use a 2 inch Johnny Joint rod end on one side and a formed steel fork and jam nut on the other.
The arms are fabricated from 1.25 inch outside diameter DOM steel tubing. Grade 8 bolts are supplied for the frame end, and the housing end keeps the factory hardware.
Key features
- Adjustable length front upper arms
- 2 inch Johnny Joint rod end
- 1.25 inch o.d. DOM steel tubing
- Formed steel fork and jam nut
- Semi-gloss black powder coat on arms and ends
Johnny Joints and alignment
A Johnny Joint is a rod end that lets the upper arm pivot at the frame or housing while keeping a fixed length. Because it carries the arm’s movement, its condition has a direct effect on wheel position and axle movement. Keeping the joint clean and the jam nut tight helps the arm hold its setting.
Check the rod end by moving the arm by hand with the vehicle safely supported. Look for play, rough movement, a loose jam nut, or cracked housings. Grit in the threads can damage the joint, so clean the threads when the arm is off the vehicle and re-coat them before reinstalling.
Adjustable upper arms change caster and pinion angle, so set the length carefully and have the front end aligned. Recheck the jam nut and the bolts after the first few drives, since repeated flex can loosen hardware.
- Check for play by hand with the vehicle supported
- Clean and coat threads before reinstalling
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | CE-9807FUA |
| Position | Front upper |
| Tubing | 1.25 inch o.d. DOM steel |
| Rod end | 2 inch Johnny Joint |
| Frame end hardware | New grade 8 bolts |
| Housing end hardware | Factory hardware retained |
| Finish | Semi-gloss black powder coat |
| Quantity | Pair |
Vehicle fitment
RockJock 4×4 lists these front upper control arms for the 2007–2018 Jeep Wrangler (JK), in 2-door and Unlimited 4-door bodies, across the Sport, Sahara, Rubicon and X models and the anniversary editions.
It is built for the 2007–2018 Jeep Wrangler (JK). Confirm the model year and body style match your Jeep before purchase.
Installation notes
Adjustable upper arms change caster and pinion angle, so set the length and have the front end aligned after installation.
What’s included
A pair of adjustable front upper control arms with the Johnny Joint rod ends, and new grade 8 bolts for the frame end.










