Overview
The Rock Slide Engineering RSEAX-SP-300-BR2 is a black steel skid plate for the 3rd Gen Step Sliders, covering the side and bottom of the step slider. It fits the 2021-2026 Ford Bronco and Bronco Sport in several trims.
Rock Slide Engineering says step sliders are designed to take a hit, but drivers on more aggressive trails benefit from a plate over them. The plate is made from 3/16 inch steel and fits over the slider like a phone case, with a cutout that keeps the step working.
Key features
- 3/16 inch steel skid plate
- Protects the side and bottom of the step slider
- Cutout for the step so the step keeps functioning
- Fits over the step slider and screws in with the same brackets
- Acid etched base with textured black powder coat
- Applied with an automated powder coat system
Skid plate use on the trail
Step sliders are built to take impacts, but a steel plate over the slider adds protection on rocky or steep trails. The plate absorbs hits along the side and bottom, which helps keep the step and its mounts in place. It is best suited to owners who regularly drive on rough terrain.
Check the plate after trail use for bent edges, cracked powder coat and loose hardware. Touch up bare steel to slow corrosion, especially at the edges where the coating is thin.
Keep the step cutout clear of mud and debris so the step still works when needed. Check the step mounts and brackets together with the plate, since they share hardware and loosened bolts can let the plate shift.
Specifications
| Brand | Rock Slide Engineering |
|---|---|
| Part number | RSEAX-SP-300-BR2 |
| Material | 3/16 inch steel |
| Finish | Textured black powder coat |
| Fitment type | Direct fit |
| Application | 3rd Gen Step Sliders |
Vehicle fitment
It fits 2021-2026 Ford Bronco in Badlands, Base, Big Bend, Black Diamond, First Edition, Outer Banks and Wildtrak trims, and 2021-2026 Ford Bronco Sport in Badlands, Base, Big Bend, First Edition and Outer Banks trims.
Bronco models outside 2021-2026 and other step slider applications are not covered. Confirm your year, model and trim fall within this coverage before ordering.
Installation notes
The plate screws into the existing step slider using the same brackets, so no drilling is described. The step cutout must line up with the step, so check the fit before tightening all hardware.
What’s included
The package is the skid plate for the step slider, and the existing step slider’s brackets and hardware are used to mount it.










