Overview
The Rock Slide Engineering 3rd Generation Step Slider, part number RSEBD-SS-300-BR4, pairs a trail rated rock slider with a powered entry step for the 2021–2026 Ford Bronco. The slider protects the rocker panel, and the step gives the driver and passengers a lower, easier way in and out.
The contour now follows the body line, and the rear end of the step is 2 inches longer for easier access to the rear door. The motor system has no gas strut, which supports longer motor life. The step drops 12 inches from the slider when the door opens and tucks back flush once the door closes.
Key features
- Powered step that extends 12 inches from the slider body when the door opens.
- Step retracts flush with the slider after the door closes.
- Smart motor technology with the gas strut removed to support motor longevity.
- Sleep mode that reduces battery drain.
- Stainless steel and aluminum internals to resist rust.
- 10-gauge steel construction with an acid-etched, textured black powder coat.
- Stand-alone wire harness, so the vehicle’s electrical system is not spliced.
- Factory mounting points used for a no-drill installation.
Living with a powered step
A powered step changes how a driver uses the rocker area, so it helps to build a short check into each trip. Look at the step’s travel path, watch it open and close once, and listen for grinding or strain. A step that hesitates may have debris in the track or a loose connector, and both are simple to inspect before a longer drive.
Because the step uses factory mounting points, the mounts are part of the vehicle’s structure and should be checked alongside the slider body. Pair the step with a skid plate if the route is more aggressive, and keep other accessories clear of the step’s full range of motion. Good habits keep a powered step reliable through normal use.
- Cycle the step once before each trip
- Inspect connectors after rough terrain
- Keep added accessories clear of the full range of motion
Specifications
| Brand | Rock Slide Engineering |
|---|---|
| Part number | RSEBD-SS-300-BR4 |
| Product type | Rock slider with powered step (3rd Generation Step Slider) |
| Body material | 10-gauge steel |
| Internals | Stainless steel and aluminum |
| Finish | Textured/matte black |
| Step drop | 12 inches from the slider body |
| Rear extension | 2 inches added at the back end of the step |
| Off-road rating | Moderate off-road conditions |
| Wiring | Stand-alone wire harness |
| Installation type | No cutting or drilling required |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2021–2026 Ford Bronco in Badlands, Base, Big Bend, Black Diamond, First Edition, Outer Banks and Wildtrak trims.
Other Ford models and earlier Bronco years are not covered. For aggressive trails, an additional skid plate is advisable. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The step is powered, so route the stand-alone harness as the instructions direct and keep it clear of moving parts. Disconnect the battery before working on the powered step’s wiring.
What’s included
It includes the step slider with its stand-alone wire harness.
Not included: An additional skid plate is not included and is advisable for aggressive trails.









