Overview
The Rock Slide Engineering 3rd Generation Step Slider, part number RSEBD-SS-300-BR2, is a powered rock slider with an integrated entry step for the 2021–2026 Ford Bronco. It guards the rocker panel along the lower body and gives a lower, easier way into the vehicle. It is rated for moderate off-road conditions.
The third generation changes the shape of the slider. The step curves to follow the body contour, which reduces the gap between the rear end of the extension and the fender flare, and an additional 2 inches on the back end of the step makes the rear door easier to reach. The step deploys 12 inches down when the door opens and retracts flush with the slider after the door closes.
Key features
- Power step that deploys from the slider body when the door opens and retracts when it closes.
- Smart motor technology, with the gas strut removed from the step internals to extend motor life.
- Sleep mode that reduces battery drain.
- Extra 2 inches on the rear end of the step compared with earlier generations.
- Curved step contour that follows the body and narrows the gap to the fender flare.
- Stand-alone wire harness, so the vehicle’s wiring is not spliced or rewired.
- Uses factory mounting points for a no-drill installation.
- Stainless steel and aluminum internals that resist rust.
Powered steps and battery care
A powered step adds a motor and wiring to the rocker area, so it works differently from a fixed slider. Keep the step free of mud and grit, since debris can slow or stall the mechanism. Sleep mode helps limit standby drain, but a vehicle left parked for long periods may still need a battery check.
A stand-alone harness keeps the wiring separate from the vehicle’s electrical system, which makes troubleshooting simpler. Before working near the step, disconnect the battery and keep the harness routed away from moving parts and hot surfaces. If the step moves slowly or stops partway, inspect the connectors and the travel path before assuming the motor has failed.
- Clean the step and travel path after mud exposure
- Check connectors after rough trail use
- Disconnect the battery before service
Specifications
| Brand | Rock Slide Engineering |
|---|---|
| Part number | RSEBD-SS-300-BR2 |
| Product type | Rock slider with powered step (3rd Generation Step Slider) |
| Body material | 10-gauge steel construction |
| Internals | Stainless steel and aluminum |
| Finish | Textured/matte black, acid-etched base before topcoat |
| Step deployment | 12 inches down from the slider body |
| Rear extension | 2 inches added to the back end of the step |
| Off-road rating | Moderate off-road conditions |
| Wiring | Stand-alone wire harness |
| Installation type | No cutting or drilling required |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 2021–2026 Ford Bronco in Badlands, Base, Big Bend, Black Diamond, First Edition, Outer Banks and Wildtrak trims.
It is rated for moderate off-road conditions. Other Ford models and earlier Bronco years are not covered. For more aggressive trails, an additional skid plate is advisable. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The step uses the factory mounting points, so no drilling is needed. The stand-alone harness plugs in without splicing, which Rock Slide Engineering says also helps owners keep the manufacturer warranty after installation. Disconnect the battery before working on the powered step’s wiring.
What’s included
It includes the 3rd Generation step slider with its stand-alone wire harness.
Not included: An additional skid plate is not included and is advisable for more aggressive trails.









