Overview
The Dana 44 Ring and Pinion Set Reverse 4.11 Ratio from G2 Axle and Gear is a reverse-ratio set at 4.11 for the Dana 44.
It is forged from high strength 8620 steel and heat treated for long service life. It is intended for high performance use and comes with a 10 year warranty.
Choosing the right setup
Reverse ring and pinion sets reverse the gear arrangement compared with a standard set, so they are matched to a specific carrier design and direction of rotation. Before buying, confirm the carrier type, the pinion position and whether a matching set of bearings or shims is needed. A high performance set is usually worth pairing with fresh bearings and a careful break-in.
Gear quality shows up in the setup. Tooth contact patterns and backlash should be checked with a gear setup tool before the housing is closed. If the old set shows pitting, chipped teeth or heavy wear on the drive side, the carrier and bearings should be inspected at the same time.
- Use fresh pinion and carrier bearings
- Check backlash and tooth contact before final assembly
- Replace the pinion crush sleeve during setup
- Refill with gear oil suited to the set
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Axle type | Dana 44 |
| Gear ratio | 4.11 |
| Gear type | Reverse |
| Material | High strength 8620 steel |
| UPC | 631410132625 |
| Warranty | 10 years |
Vehicle fitment
It is a Dana 44 reverse set at 4.11. Confirm the application for your truck before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the pinion depth and preload on a reverse set with a gear setup tool, and check tooth contact before the carrier goes into the housing.
What’s included
One ring and pinion set.









