Overview
Part 911713 is a Rigid Industries SR2-Series Single Row LED light bar from the SR-Series PRO line. It uses a single row of LEDs in a slim, low profile housing, which helps where mounting space is limited.
The PRO design projects light a long distance while using very little power. The revision adds improved LEDs and up to 111% more raw lumens than earlier SR-Series bars, and the line is offered with either Hybrid or Specter optics in a variety of beam patterns.
The housing is extruded aluminum with a durable powder coat in black or white. The branding has been refreshed and the circuit boards are blacked out on PRO models. Universal Fit means it is not designed around one vehicle, so it suits anyone who needs a compact single row light with a choice of optics for off-road, industrial, agricultural or marine use.
Key features
- Single row LED layout in a low profile housing
- Up to 111% more raw lumens than earlier SR-Series models
- Hybrid or patented Specter optic choice in several beam patterns
- Extruded aluminum housing with black or white powder coat
- Blacked-out circuit boards and new branding on PRO models
Single row mounting tips
Single row bars suit tight spots where a double row would be too large. Measure the footprint and check the mounting surface for flex, since a thin panel will vibrate and shift the aim. Pick a bracket that holds the bar rigidly and allows fine adjustment, because small aim changes make a large difference at distance. Consider the beam pattern you need, since a focused pattern reaches farther down a track and a wider pattern helps at close range.
Power and weather are the other concerns. Route the cable away from heat and moving parts, use a grommet where it passes through sheet metal, and seal connectors against moisture. Because low-profile bars are often placed in exposed spots, check the lens and bolts after washing or deep water crossings. Keep spare fuses on hand and re-check the aim once the bar is secured.
- Measure the footprint before ordering a bracket
- Check the mounting surface for flex
- Use a grommet where wiring passes through metal
- Re-check aim after the bar is fixed
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 911713 |
| UPC | 849774029868 |
| Series | SR2-Series Single Row (SR-Series PRO) |
| Light source | Single row LED |
| Optic | Hybrid or patented Specter, multiple beam patterns |
| Housing | Extruded aluminum |
| Finish | Black or white durable powder coat |
| Output | Up to 111% more raw lumens |
Vehicle fitment
Rigid marks this light bar as Universal Fit, so it is not designed around one vehicle. Pick the optic and beam for your application, and make sure the mounting surface suits the bar’s footprint.
Installation notes
Test the mounting position and cable route before fixing the bar, since single row bars are often placed in tight spots. Wire the light through a fuse and keep the switch on a relay. Local law sets the terms for lights on public roads, so look that up before the light goes on a street-going vehicle.
What’s included
No included parts are named for this light, so review the package for brackets, harness and hardware before starting the install.









