Overview
The Revtek 436 is a 2.5 inch lift kit for the 2000–2006 Toyota Tundra and fits the Base, Limited and SR5 models. It lifts the front 2.5 inches and the rear 1.5 inches for a level stance.
The kit uses coil spring spacers at the front and lift blocks with U-bolts and add-a-leaf at the rear. It works with manual or automatic hubs and does not require replacement shocks, so the existing shock absorbers can stay in place.
Key features
- Front lift of 2.5 inches and rear lift of 1.5 inches for a level stance
- Works with both manual and automatic hubs
- Coil spring spacers at the front
- Lift blocks, U-bolts and add-a-leaf at the rear
- No replacement shocks required
Choosing a level stance lift
A level stance lift raises the front more than the rear, which is useful when a truck sits lower in back because of its load or its original springs. Using a rear lift block and U-bolts instead of new springs keeps the rear axle in its original position relative to the leaf pack, which is a common approach on older Tundras.
Leaf packs and U-bolts settle over time, so they should be inspected and re-torqued after installation and at regular service intervals. Wheel offset affects clearance at the fenders and the inner tire contact with the suspension, so it is worth checking the wheel fitment before any larger tire is mounted. Steering components and brake lines should also be checked after the lift.
- Re-torque U-bolts after the first drives
- Inspect leaf packs for sag or cracks
- Check fender clearance with the chosen wheel offset
- Look at brake line length after the lift
Specifications
| Brand | Revtek |
|---|---|
| Part number | 436 |
| UPC | 811323010153 |
| Lift height | 2.5 inch front, 1.5 inch rear |
| Suspension type | Spacer |
| Front lift | Coil spring spacers |
| Rear lift method | Lift block, U-bolts and add-a-leaf |
| Maximum recommended wheel size | 15×18, or 16×8 with medium offset |
| Shocks | Not included; replacement not required |
Vehicle fitment
The kit fits the 2000–2006 Toyota Tundra, including Base, Limited and SR5 models.
Match your Tundra’s year, model and trim against this kit before ordering.
Installation notes
The maximum recommended wheel size is 15×18, or 16×8 with a medium offset, so check the offset of any larger wheel before fitting the kit.
What’s included
The kit includes coil spring spacers, lift blocks, a U-bolt kit and the mounting hardware for the rear lift.
Not included: Replacement shocks, which Revtek says are not required for this kit.







