Overview
The Fabtech FTS21110 is a lift block and U-bolt kit. It includes two lift blocks, four U-bolts, eight nylock tall nuts and eight thick flat washers, and it is a direct-fit part.
Why block height matters
Lift blocks raise the axle relative to the spring seat, which changes ride height and how the suspension geometry behaves. The height of the block sets how much lift you get, so the kit should match the lift you plan to run. Taller blocks shift driveline angles and can change the reach of brake lines, so the change has to be checked against your vehicle.
U-bolts carry much of the load, so they should be tightened in a crisscross pattern and re-checked after the first drives. Replace the nuts and washers if they show damage. Driveline and brake components often need inspection after any block change, and a wheel alignment is usually needed afterward.
- Driveline angle check
- Brake line length
- U-bolt torque after the first drives
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS21110 (also FABFTS21110) |
| UPC | 674866034259 |
| Product type | Suspension block and U-bolt kit |
| Lift blocks | 2 |
| U-bolts | 4 |
| Nylock tall nuts | 8 |
| Thick flat washers | 8 |
| Fitment type | Direct fit |
Vehicle fitment
Confirm the block height and fit for your vehicle’s year, model and trim before ordering.
No vehicles are named, so do not assume this kit suits any particular truck or axle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension, steering and axle components are safety-critical, so professional installation is recommended. Follow the included instructions and torque every fastener to the correct values for this kit.
- Support the vehicle on rated jack stands on level ground; never work under a vehicle held only by a jack.
- Inspect nearby bushings, mounts and hardware while the area is open, and replace anything worn.
- Re-check fastener torque after the first miles of driving, and again at regular service intervals.
- Have the alignment checked after any suspension or steering work.
- Confirm tire, brake line and wiring clearance through the full range of suspension travel before driving normally.
What’s included
Two lift blocks, four U-bolts, eight nylock tall nuts and eight thick flat washers.








