Overview
The Revtek 2 Inch Lift Rear Coil Spring Set (part number 921) gives a 2-inch rear lift. It is made for the 2010–2017 Toyota 4Runner SR5.
The set is designed for easy installation and good ride quality. It is built around a stock height of 2.5 inches, which is the reference point for the lift.
Key features
- 2-inch rear lift
- Coil spring set for the rear
- Easy to install
- Designed for smooth ride quality
- Designed for durability
- Black finish
Driveline and shock checks
Raising only the rear changes the pinion angle and the way the driveline works under load. Measure the rear ride height before and after the job, and check the U-joint angles while the vehicle is on stands. Stretched brake lines and a shock that is too short for the new height are common issues to look for.
A rear lift also shifts the balance between the front and rear of the vehicle. Recheck the rear bump stops and the sway bar end links once the set is in, because they can rub or bind when the suspension is set at a new height.
- Measure rake before and after installation
- Check pinion angle with an inclinometer
- Inspect brake lines for tension
Specifications
| Brand | Revtek |
|---|---|
| Part number | REV921 |
| Position | Rear |
| Lift | 2 inches |
| Height | Stock to 2.5 inches |
| Color | Black |
| Fitment type | Direct fit |
| Warranty | Limited lifetime, non-transferable, covers repair or replacement of the product |
Vehicle fitment
It fits the 2010–2017 Toyota 4Runner SR5.
The 2018 and newer 4Runner models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A rear spring change alters the rear height and driveline angle, so check the driveline and shock length after installation.
The set is designed for installation without extra fuss. It carries a limited lifetime warranty covering repair or replacement for defects in material and workmanship. The warranty is non-transferable.
Because the set is a rear coil spring kit, the rear ride height rises while the front stays at factory height. Check the rear driveline angle and the brake line length once the springs are installed, and confirm the shock length suits the new height.
What’s included
The rear coil spring set.







