Overview
The ARB OME150PR10 is a polyurethane fitting kit for Old Man Emu coil springs. It is an isolator that sits between the coil spring and the body, acting as a cushion that is meant to eliminate spring-related squeaking and clunking.
The kit is a fitting part rather than a spring, so it is ordered alongside the coil springs it is used with. It is made for the 4Runner and FJ Cruiser models below.
Key features
- Polyurethane isolator between the coil spring and the body
- Designed to cut spring-related squeaking and clunking
- Direct fit for the 4Runner and FJ Cruiser
- Part number OME150PR10 with UPC 70000659131
How isolators affect spring noise
Coil spring noise often comes from metal contact between the spring and its seat, and an isolator reduces that contact. Polyurethane isolators also add a small amount of cushioning, so ride feel can change slightly after fitting. Replacing a worn or cracked isolator is usually a simple job that can be done with the spring removed.
When springs are replaced, isolators are often replaced at the same time to keep the spring seat clean and aligned. Check the spring seats for rust, pitting or wear before installing new parts. Polyurethane can crack with age and exposure to heat or oil, so inspect it during routine service and after heavy off-road use.
- Inspect isolators at each service
- Clean the spring seat before fitting
- Replace cracked or flattened isolators
Specifications
| Brand | ARB 4×4 Accessories (Old Man Emu) |
|---|---|
| Part number | OME150PR10 |
| UPC | 70000659131 |
| Material | Polyurethane |
| Type | Coil spring fitting kit |
Vehicle fitment
The fitment covers the 1984 to 2017 Toyota 4Runner in the Base, DLX, Limited, SR5, Sport, TRD Off-Road, TRD Pro and Trail trims, and the 2007 to 2014 Toyota FJ Cruiser in the Base, TRD Special Edition and Trail Teams Special Edition trims.
Other Toyota models and years are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One coil spring fitting kit.


