Overview
The ARB 2884 is an Old Man Emu coil spring for the 2016–2017 Toyota 4Runner and the Toyota Land Cruiser in base trim from 2003 to 2011 and 2013 to 2017. It is a direct-fit part set up for those vehicles rather than a general coil.
Old Man Emu coils are designed around each vehicle’s load capacity to keep handling in control and the ride comfortable. The lift a new spring gives is a result of that design, so the coil is chosen for the load first.
Key features
- It is a direct fit for the 2016 and 2017 Toyota 4Runner in several trims.
- Covers the Land Cruiser base trim for the listed years
- Designed for the specific make and model it is sold for
- Part number 2884 with UPC 9319092023035
Front coil changes and checks
A front coil spring carries part of the front axle weight and sets the height at each front corner. Changing it moves the lower control arm and the steering geometry, so the front end should be checked after the job. Uneven front height, pulling to one side and uneven front tire wear are common signs that a coil or its related parts need attention.
Front springs are often changed along with shocks, ball joints and control arm bushings, since all of these take load from the same place. Inspecting them at the same time avoids a second job later. After the first few drives, recheck ride height on both sides and confirm the alignment has held.
- Check ball joints and control arm bushings
- Confirm front ride height on both sides
- Inspect shocks for leaks or weak damping
Specifications
| Brand | ARB 4×4 Accessories (Old Man Emu) |
|---|---|
| Part number | 2884 |
| UPC | 9319092023035 |
| Type | Coil spring |
Vehicle fitment
It fits the 2016 and 2017 Toyota 4Runner in several trims, including Limited, SR5, TRD Off-Road, TRD Pro and Trail, and the Toyota Land Cruiser base trim from 2003 to 2011 and 2013 to 2017.
The list has no entry for 2012 Land Cruisers, and 4Runner years before 2016 are not shown. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check ride height and alignment after fitting, since a new coil changes the front suspension geometry.


