Overview
The Trail Gear TG Side-by-Side Battery Box Kit (part number 300384-KIT) is a battery box that keeps a battery in place on rough terrain. It is built for side-by-side use and works with any Optima 34/78 group battery. The flat back design allows mounting behind the seat or cab.
Trail Gear points out that batteries held in place by bungee cords can come loose and cause fire and sparks. This box is meant to hold the battery securely on the toughest rocks and trails. Its top lifts off after three bolts are removed, so the battery can be removed or installed in minutes.
Key features
- Holds the battery securely instead of relying on bungee cords
- Works with any Optima 34/78 group battery
- Can be welded or bolted into place using holes on the bottom
- Bolts on the back side let two boxes join to form a four battery holder
- Flat back design for mounting behind the seat or cab
- Top lifts off after removing three bolts for easy battery access
Securing the battery on trails
Loose batteries are a real hazard off road. Bouncing on rocks can break terminal connections, damage cases and, in the worst cases, short against metal. A rigid box with a fastened top keeps the battery where it belongs through jumps and sharp impacts, which is the job a solid hold-down does better than strapping alone.
Terminal protection matters as much as the box. Cover the posts so a stray tool or strap cannot bridge them, and keep cables clear of the box edges where they can rub. After each trip, check the top hardware, the mounting welds or bolts and the cable ends. Check for corrosion and moisture in the tray before resealing.
- Check top hardware before every trip
- Cover battery terminals with insulating caps
- Inspect mounting welds or bolts for cracks
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 300384-KIT |
| Battery compatibility | Any Optima 34/78 group battery |
| Material | 12 gauge steel |
| Construction | CNC laser cut and formed |
| Finish | Unfinished |
| Mounting | Welded or bolted |
| Top attachment | Three bolts |
| Multi-box setup | Two boxes bolt together for four batteries |
Vehicle fitment
The box is designed for side-by-side installations and mounts behind the seat or cab. Verify your year, model and trim match before buying, and measure the mounting space before installing.
Confirm the battery is an Optima 34/78 group size. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Weld the box in place or bolt it through the holes on the bottom. The steel comes unfinished, so plan any coating before mounting. Secure the battery in the box before driving, since the box is built to replace loose bungee cord holding.
What’s included
Count the hardware on hand before starting the install. The battery is not included, since the box is built to hold one. Not included: the battery, which the box is built to hold.











