Overview
The Odyssey Batteries Extreme Series PC1200MJ is a 540 CCA top post battery, part number ODYPC1200MJ, with a universal fit label and no specific vehicles named. Check group size, post layout and hold-down fit against your own vehicle before installing.
The battery uses pure virgin lead plates rather than the lead alloy found in most batteries, which allows more plates and more plate surface area. It is built for vehicles with growing electrical demands, for everyday driving or emergency use, and is rated for up to 400 cycles at 80% depth of discharge.
Key features
- Pure virgin lead plates that allow more plates and more plate surface area
- Top post terminal layout
- 540 amperes cold cranking amps (CCA)
- Rated at up to 400 cycles at 80% depth of discharge
- Odyssey claims twice the overall power and three times the life of conventional batteries
Choosing a top post battery
Top post batteries have cable clamps that sit on the upper face of each terminal, so the post layout must match the cables already on the vehicle. Compare the post polarity, case footprint and overall height with the battery being replaced. A battery that is slightly taller can stop the hold-down or hood from seating properly, and a mismatched footprint can leave it loose in the tray.
Cold cranking rating matters most in cold weather, when the starter needs a short burst of high current. Vehicles that run extra accessories at idle put more demand on the battery, so a higher rating can help when the electrical load is heavy. Keep the cable clamps clean and tight so the battery delivers its full output.
- Post polarity and layout
- Case footprint and hold-down fit
- Cable reach to both terminals
- Load from added accessories
Specifications
| Brand | Odyssey Batteries |
|---|---|
| Part number | ODYPC1200MJ |
| Series | Extreme Series |
| Post location | Top |
| Cold cranking amps | 540 amperes |
| Plate material | Pure virgin lead |
| Cycle life | Up to 400 cycles at 80% depth of discharge |
| Group | Universal |
Vehicle fitment
This battery carries a universal fit label, and no vehicle years, makes or models are named for it. Fitment to a specific vehicle is therefore not confirmed. Compare the group size, post layout and cable reach with your current battery before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Top post terminals must line up with the cable ends on your vehicle, so check the post layout first. Lead batteries can release hydrogen gas, so keep sparks and open flames away while you work.
What’s included
Before installing, confirm that any cables, hold-downs and hardware in your kit match the job.










