Overview
The Rancho U-bolt kit (part number RS746) is a set of U-bolts for a rear 8.25 Chrysler axle. It fits the 1984–1997 Jeep Cherokee XJ and the 1993–1997 Grand Cherokee ZJ.
The kit includes 4 U-bolts, 8 washers and 8 nuts. Confirm the axle location on your truck before installing.
Key features
- Four U-bolts
- Eight washers
- Eight nuts
- Made for an 8.25 Chrysler axle
- Direct fit
Axle U-bolts and installation
U-bolts clamp the leaf spring to the axle housing, so they carry the axle load and must stay tight. Over time, nuts can loosen and washers can flatten, and the clamp loses its grip. Rust on the threads or bent U-bolts are common reasons to replace them, especially on older Cherokee axles.
Check the axle location before installing, and make sure the U-bolts are fitted to the correct side of the spring. Use the washers and nuts included with the kit, and tighten them in a crisscross pattern. Recheck the nuts after the first few drives, since the clamp settles as the parts seat. Inspect the spring pads and the axle housing for cracks while the U-bolts are off.
- Clean the threads before fitting new nuts
- Replace any U-bolt with stretched threads
- Check the spring pads for wear
Specifications
| Brand | Rancho |
|---|---|
| Part number | RANRS746 |
| Axle | 8.25 Chrysler |
| Included | 4 U-bolts, 8 washers, 8 nuts |
| Position | Front, per the spec sheet |
| Fitment | Direct fit |
Vehicle fitment
It fits the 1984–1997 Jeep Cherokee (XJ) in the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims, and the 1993–1997 Jeep Grand Cherokee (ZJ) in the Base, Laredo, Limited, Orvis, SE and TSi trims.
The list does not include the Wrangler, the Comanche or any Grand Cherokee WJ. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Four U-bolts, eight washers and eight nuts.







