Overview
The Rancho RS55282 is a front shock absorber from the RS5000X Series, fitting the 2002–2005 Dodge Ram 1500 in Laramie, SLT and ST trims. It is a twin tube gas-pressurized shock with an enlarged 2-1/4 inch body, built for road and off-road use.
Its patented rebound valving and advanced compression phase were developed by Rancho’s ride engineers for handling on and off road. The design includes a 35mm full-displaced bore, a 16mm nitro-carburized rod and a glass-filled, Fluon banded piston. The rear RS55284 is a different position, so match the part number to your axle.
Key features
- Progressive engagement valving
- Tuned compression control valve
- Gas-pressurized shock body with an enlarged 2-1/4 inch twin tube
- Rebound bumper and protective boot
- Glass-filled, Fluon banded piston
- Low-friction, self-lubricating seal
- Double-welded loops
Gas pressure and steady damping
A gas-pressurized twin tube shock keeps the working fluid under pressure, which helps damping stay consistent during repeated bumps and quick direction changes. The enlarged body and piston design are meant to resist fade on rough roads. Front shocks on a Ram 1500 control steering response and body motion, so the feel changes noticeably when they wear.
Before fitting a replacement, check the boot for tears, the rebound bumper for cracks and the mounting bushings for hardening. A pressurized shock that leaks at the seal or feels suddenly soft at one corner should be replaced as a matched pair. Replace the upper and lower mounting hardware as needed, since worn hardware can shift the shock’s position.
- Boot tears or missing rebound bumper
- Seal leaks or oil film on the body
- Hardened or cracked bushings
- Replace front shocks as a pair
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS55282 |
| UPC | 39703008495 |
| Position | Front |
| Compressed length | 10.97 |
| Extended length | 16.63 |
| Travel length | 5.66 |
| Body | Enlarged 2-1/4 inch twin tube, gas pressurized |
| Bore | 35mm full-displaced |
| Rod | 16mm nitro-carburized |
| Piston | 1-3/8 inch sintered iron, glass-filled, Fluon banded |
| Bushings | Black natural rubber |
| Lift/drop | 0 in. |
| Fitment type | Direct Fit |
Vehicle fitment
It fits the 2002–2005 Dodge Ram 1500 in Laramie, SLT and ST trims.
Ram 1500 trucks from other model years and trims not named here are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The package is one Rancho RS5000X Series front shock absorber, part number RS55282. Verify the hardware kit before starting the install.









