Overview
The Rancho RS999157 is a rear RS9000XL Series shock absorber for Land Rover Range Rover models from 1987 to 1995, Defender 110 in 1993, Defender 90 in 1994, 1995 and 1997, Discovery in 1994 and 1995, and Range Rover Sport in 1993.
The rear position, a 2.75-inch (70mm) body and an 18mm chrome rod make up the basic build. Tuning is 9-position through myRide, adjustable by hand or with the remote option. The body is nitrogen gas charged, and the listed lift rating runs from zero to one inch, which suits stock or lightly lifted Land Rovers.
Key features
- Rear position for the listed Land Rover models
- Nine damping positions through the myRide system
- Nitrogen gas charge
- 2.75-inch (70mm) body and 18mm chrome rod
- Liquid metallic finish, polyurethane bushings and a protective boot
On the trail
Rear shocks control how the axle moves over bumps and during braking. On a Land Rover, they work alongside the coil springs and the radius arms to keep the rear end settled, so a tired unit can let the back end wander. Off road, a shock that holds firm through a long washboard section makes steering easier to manage. Softer settings can help on slow crawls where wheel articulation matters more than body control.
Rubber bushings at each end of the shock take a lot of movement, and worn ones can knock or feel loose. Check them when the shock comes off, along with the mounting bolts. Swapping a rear shock on one side only may leave the two sides feeling different, so consider both rear units together. Keep the boot clean and inspect for seeping oil or a dented body after rough trail days.
- Check rear mounting bushings for cracks before fitting
- Inspect the boot after trail use
- Compare both rear shocks for matching feel
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999157 |
| UPC | 10039703091579 |
| Shock series | RS9000XL |
| Position | Rear |
| Body diameter | 2.75 in. (70mm) |
| Rod diameter | 18mm chrome |
| Tuning | 9-position manual/remote |
| Charge | Nitrogen gas charged |
| Lift rating | 0 to 1 in. lift |
| Finish | Liquid metallic |
| Bushings | Polyurethane (red urethane) |
| Boot | Protective boot included |
| Warranty | Limited Lifetime Warranty |
Vehicle fitment
The 1993 Land Rover Defender 110 in Base trim fits. The 1994 to 1995 and 1997 Defender 90 fit in Base and LE trims. The 1994 to 1995 Discovery fits in Base trim. The 1987 to 1995 Range Rover fits in several trims, and the 1993 Range Rover Sport fits too.
The 1996 Defender 90 and Discovery models after 1995 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lift rating runs only from zero to one inch, so a Land Rover with a taller rear suspension needs a shock rated for its height. Compare the rear mounting ends with the shock you are removing before fitting.
What’s included
One RS999157 rear shock absorber with a protective boot.
Not included: Brackets and fasteners are not included. Check your existing rear mounting hardware before starting the install.














