Overview
The Rancho RS5757 is a gas-charged RS5000 Series front shock absorber. It fits the 2005–2009 Dodge Dakota and the 2006–2009 Mitsubishi Raider. It is made for both pavement and trail use with stock or lifted suspensions.
The RS5757 uses ten-stage velocity-sensitive valving. Velocity-sensitive valving changes damping resistance with how fast the piston moves, so small bumps and large impacts are controlled differently. The gas-charged body adds a pressurized chamber that helps the oil resist foaming under heavy use. The RS5000 line has been a shock choice for light trucks since 1985 and carries a limited lifetime warranty.
Key features
- Ten-stage velocity-sensitive valving for controlled damping
- Gas-charged construction for the front position
- 5/8-in. (16mm) piston rod
- 1 3/8-in. (35mm) piston diameter
- Designed for both stock and raised vehicles
- Direct-fit design for the front position of the 2005–2009 Dodge Dakota and 2006–2009 Mitsubishi Raider.
Ride control on mixed-use trucks
Trucks that spend time on pavement and on trails put varied demands on the front shocks. Damping that feels firm on the highway may not control rough, rocky ground well, and the reverse can also be true. Valving that responds to piston speed is designed to handle both kinds of motion, which is why it is often chosen for mixed use.
Front shocks work alongside springs, bushings and tires, so a worn part elsewhere can make a good shock feel poor. Check the upper and lower mounts for play and look at the tires for uneven wear. Fresh hardware and clean mounting surfaces help the new shock hold its position under load.
- Clean mounting surfaces before installing
- Check for play in the mounts
- Watch tire wear patterns
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS5757 |
| UPC | 39703575706 |
| Series | RS5000 Series |
| Position | Front |
| Valving | Ten-stage velocity-sensitive |
| Piston rod diameter | 5/8-in. (16mm) |
| Piston diameter | 1 3/8-in. (35mm) |
| Hydraulic type | Gas charged |
| Fitment type | Direct fit |
| Quantity | Each |
Vehicle fitment
It fits the 2005–2009 Dodge Dakota in the Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX and TRX4 trims, and the 2006–2009 Mitsubishi Raider in the DuroCross, LS, SE and XLS trims.
Dakota model years outside 2005–2009 are not in this list, and other Mitsubishi models are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One RS5757 shock absorber per unit.
Not included: Check the package contents against your installation for mounting hardware, bushings and dust boots before starting.









