Overview
The Rancho RS55330 is a rear RS5000X Series shock absorber, sold with the RS6507B System and a w/2.5 in. Lift setting. Its rebound valving is patented and the compression phase is advanced, which is intended to improve handling and performance on and off-road.
Rear-position shocks should be checked against the lift setting and ride height of the vehicle. The 2.5 in. lift setting is the application detail given for this part, so confirm the rest of your vehicle’s year, model and trim before ordering.
Key features
- Rear-position shock in the RS5000X Series
- Patented rebound valving system
- Advanced compression phase from Rancho ride engineers
- Built for a w/2.5 in. Lift setting
Rear shock position and lift
Rear shocks carry load differently than front units, so position matters as much as length. Rear shocks often work through leaf springs or coil springs with different mounting angles, and a shock that suits the front may not suit the rear. Check the mount style at both ends and compare the lift setting before fitting.
Lift changes ride height and the angle of the shock, which can shorten the usable range of motion if the new unit is not matched. Many owners replace rear shocks in pairs so both sides respond alike under load. When the old units come off, inspect the bushings, mounting hardware and spring seats for wear. Keep track of any spacers or hardware that were removed.
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS55330 |
| UPC | 10039703006115 |
| Series | RS5000X |
| Position | Rear |
| Lift setting | w/2.5 in. Lift |
| Listed with | RS6507B System |
Vehicle fitment
Check that the rear application matches your current shock and ride height, and verify the year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this is a rear shock, compare the 2.5 in. lift setting with your vehicle’s current ride height before fitting, and check how the RS6507B System requirement applies to your existing setup.
What’s included
One RS5000X rear shock absorber, part RS55330, sold with the RS6507B System. Check the packaging to see what the system includes before installing.









