Overview
The Rancho RS999040 is a rear shock absorber from the RS9000XL Series that fits the 2000–2006 Toyota Tundra in Base, Limited and SR5 trim. It is nitrogen gas charged, with nine-position tuning, an 18mm chrome rod and a 2.75-in. (70mm) body for full-size trucks used on pavement and trail.
The lift/drop setting for this rear unit is 0 in., so it is a direct-fit replacement. The shock uses red urethane bushings and a protective boot, and the finish is liquid metallic.
Key features
- Nine-position tuning for adjustable compression and rebound.
- Nitrogen gas charged design.
- 18mm chrome rod diameter.
- 2.75 in. (70mm) body diameter.
- Liquid metallic finish.
- Red urethane bushings.
- Protective boot included.
Keeping a Tundra rear suspension sound
On a full-size pickup, the rear shocks carry the load of the bed and any cargo, and they control how the rear axle rebounds over washboard roads and dips. A shock that has lost damping can let the rear end bounce, and it may make the truck feel loose when it is loaded.
Rubber and urethane bushings wear over time, and a worn bushing lets the shock move out of line. Inspect both eyelets for cracks or play before fitting a new shock. Check the rear springs for sag too, since a sagging spring reduces how much the shock can help.
Replacing both rear shocks at the same time keeps the two sides matched. Tighten the mounts to the factory specification and recheck them after the first few drives. Keep the rod clean so grit does not damage the seal.
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999040 |
| UPC | 10039703090404 |
| Shock series | RS9000XL Series |
| Position | Rear |
| Lift/drop | 0 in. |
| Body diameter | 2.75 in. (70mm) |
| Rod diameter | 18mm chrome |
| Tuning | 9-position manual/remote |
| Charge | Gas charged |
| Finish | Liquid metallic |
| Bushings | Red urethane |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2000–2006 Toyota Tundra (Base, Limited, SR5).
Tundra model years before 2000 or after 2006 and other Toyota trucks are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the lift/drop rating is 0 in., this shock suits a Tundra at stock height. Check the rear mount on your truck before fitting, since the bushing style differs from the front units in this series.
What’s included
Includes the shock absorber with its protective boot and red urethane bushings.
Not included: Check that you have mounting fasteners before starting the install.














