Select your vehicle

Rancho RS5000 Series Shock Absorber – RS5395

Rancho

Shop Nissan Titan Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rancho RS5395 rear shock for the 2004–2015 Nissan Titan in LE, S, SE, SL, SV and XE trim
  • Gas charged hydraulic design with ten-stage velocity sensitive valving
  • Red protective boot included, sold as each
  • Lift height of 0 in. lift/drop

Description

Overview

The Rancho RS5395 is a rear shock absorber from the RS5000 Series, named for the 2004–2015 Nissan Titan in LE, S, SE, SL, SV and XE trim. It is a gas charged hydraulic shock made for light trucks and SUVs that see both road and trail use.

The RS5000 series is built for stock and raised vehicles alike, and it has long been a common choice for light trucks. The RS5395 pairs ten-stage velocity sensitive valving with a piston rod of 5/8-in. (16mm) diameter and a piston of 1 3/8-in. (35mm) diameter.

The shock is sold as each, so a full-size pickup with two rear shocks requires two units. A red protective boot is included, and Rancho’s warranty is a limited lifetime coverage stated by the manufacturer.

Key features

  • Rear position, gas charged hydraulic shock
  • Ten-stage velocity sensitive valving
  • 5/8-in. (16mm) diameter piston rod
  • 1 3/8-in. (35mm) diameter piston
  • Red protective boot included
  • Direct fit, with a lift height of 0 in. lift/drop
  • Limited lifetime warranty from Rancho

Matching shocks to truck use

Rear shocks on full-size trucks carry the weight of the cargo bed and any towing, so the load a shock sees changes with how the truck is used. A shock designed for stock height works with the factory springs, while a shock used on a raised suspension needs to match the new geometry. Matching the shock to how the truck is driven matters more than chasing a single feature.

Ten-stage velocity valving gives a range of damping settings, but the real test is how the truck feels loaded and unloaded. When replacing a rear shock, check the pair, because two shocks of different wear levels can pull the rear end to one side. Keep the mounting hardware clean and check bushings during the install, since corroded fasteners make removal harder the next time.

  • Replace both rear shocks together
  • Note the lift height before installing
  • Check bushings and brackets for wear

Specifications

Brand Rancho
Part number RS5395
UPC 39703002981
Series RS5000 Series
Position Rear
Fitment type Direct fit
Shock type Hydraulic, gas charged
Valving Ten-stage velocity sensitive
Piston rod diameter 5/8-in. (16mm)
Piston diameter 1 3/8-in. (35mm)
Lift height 0 in. lift/drop
Included Red protective boot
Sold as Each

Vehicle fitment

It fits the 2004–2015 Nissan Titan in LE, S, SE, SL, SV and XE trim. Only these six trims are covered by this fitment.

Nissan Pathfinder, Xterra and Armada applications are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One RS5395 rear shock absorber with a red protective boot, sold as each.

SKU: RANRS5395 Category:

Specification

Shipping weight 5.06 lbs
Package dimensions 24.30 × 3.30 × 3.30 in
brands

Fitment

VehicleYearsTrims
Nissan Titan2004–2015LE, S, SE, SL, SV, XE

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which Nissan Titan years does the RS5395 fit?

It fits the 2004 through 2015 Nissan Titan in LE, S, SE, SL, SV and XE trim. Those six trims are the only ones covered, so compare your truck's trim against that list before you order.

What are the RS5395 part number and UPC?

The part number is RS5395 and the UPC is 39703002981. It is a rear position, gas charged hydraulic shock in Rancho's RS5000 Series, with ten-stage velocity sensitive valving.

Is the RS5395 sold as one shock or a pair?

It is sold as each, so every unit is one shock absorber. A red protective boot is included with it. A truck with two rear shocks will need two units.

Can the RS5395 be used with a lift?

The RS5395 has a lift height of 0 in. lift/drop, so it suits stock-height trucks. The series is made for stock and raised vehicles, but this part's design height is 0 in. Check your suspension setup and lift height before ordering.

Do rear shocks need to match a truck's towing use?

They should suit the load. Shocks built for stock height work best with factory springs and light loads. A truck that tows often may need a different setup, so review your load and suspension before choosing.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Nissan Titan Shock Absorbers on Amazon