Overview
The TeraFlex 1155120 is a 0.5-inch rear spacer load leveling kit for the 2018–2021 Jeep Wrangler JL and JLU, in the Rubicon, Sport and Sahara trims with both 2-door and 4-door bodies. It adds height to help the rear sit higher when the vehicle carries heavier aftermarket gear.
The spacers help compensate for bumpers, a winch, a larger spare tire and weekend gear. The kit can be used with only the front, only the rear or all four spacers, depending on how the load level should be set.
Key features
- 0.5 inch rear spacers
- All necessary hardware included
- Works with original or stock-length aftermarket shock absorbers
- Can be used at the front, rear or all four corners
- Polyurethane spacer material
Load leveling and rear suspension
A rear coil spacer raises the body where the spring seat sits, so the rear can carry extra gear without sagging as much. The spacer does not make the spring stiffer, which means the ride stays close to stock while the height changes. Heavier equipment still shifts weight rearward, so the rear suspension works harder over bumps and under braking.
Polyurethane spacers are durable under normal use, but they should be inspected with the shocks and bump stops. Worn shocks can allow the rear to bounce after a load is added, and a bump stop that is compressed too often can wear quickly. Checking the rear height with the usual load gives a reliable reading.
- Check rear height with the normal load in place
- Inspect the shocks for leaks and fade
- Look at the bump stops for wear or flattening
- Recheck the spacers after the first few loaded trips
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | TER1155120 |
| Rear lift height | 0.5 inch |
| Lift method | Coil spring spacers |
| Spacer material | Polyurethane |
| Finish | Black |
| Track bar drop | Not included |
| Bump stops | None |
| Front lift height | 0.5 inch, as the specifications list it |
Vehicle fitment
It fits the 2018–2021 Jeep Wrangler JL in the Rubicon, Sport, Sport S and Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S trims.
The title and description describe rear spacers, while the specification list gives a front lift height of 0.5 inch. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit is sold with all the hardware, the installation is a spacer fit at each corner the owner chooses. The kit works with stock-length shocks, so no extended shocks are needed for the added height.








