Select your vehicle

Rancho RS9000XL Series Shock Absorber – RS999317

Rancho

Shop Dodge Ram 2500 Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front shock for Dodge Ram 1500, 2500 and 3500 trucks
  • Ram 1500 fits 2006–2008 only, plus several 2500 and 3500 years
  • w/4 in. lift rating, with 9-position myRide tuning
  • 2.75 in. (70mm) body, 18mm rod, gas charged
  • Part number RS999317, UPC 10039703093177

Description

Overview

The Rancho RS999317 is a front RS9000XL series shock absorber for several Dodge Ram pickups, including the 2006–2008 Ram 1500 and selected 2500 and 3500 model years. It has a 2.75 in. (70mm) gas-charged body and an 18mm chrome rod, and it is rated for a w/4 in. lift.

Front shocks control wheel motion at the front axle. This model adds a 9-position myRide tuning setting, polyurethane bushings and a liquid metallic finish to the RS9000XL design.

The lift rating is the main fitment check for this part, so match the truck’s lift to w/4 in. and confirm the model year against the list below.

Key features

  • Front-position shock for the listed Ram trucks
  • 9-position myRide tuning, manual or remote
  • 18mm chrome rod in a 2.75 in. (70mm) body
  • Nitrogen gas charge
  • Polyurethane bushings and liquid metallic finish
  • Protective boot and a Limited Lifetime Warranty stated by Rancho

Front suspension wear signs

A front shock works hardest when the truck brakes, turns and crosses uneven ground. Over time the damping valving and seals wear, and the truck may start to bounce after a dip, pitch hard under braking or drift in crosswinds. Oil on the outside of the body is another sign that the unit is no longer holding fluid and gas properly.

Front shocks are rarely the only worn part on an older Ram. Ball joints, tie rod ends and control arm bushings take the same loads, and a worn bushing can make a new shock feel loose. Inspect those parts while the front end is raised, and replace shocks in pairs so both sides damp evenly.

  • Check for oil streaks on the shock body
  • Look for uneven tire wear across the front axle
  • Note any bounce that continues after a bump

Specifications

Brand Rancho
Part number RS999317
UPC 10039703093177
Shock series RS9000XL
Position Front
Fitment type Direct fit
Lift height w/4 in. Lift
Body diameter 2.75 in. (70mm)
Rod diameter 18mm chrome
Tuning 9-position manual or remote (myRide)
Charge Gas charged, nitrogen
Bushings Polyurethane
Finish Liquid metallic
Warranty Limited Lifetime Warranty

Vehicle fitment

The manufacturer fitment list gives the 2006–2008 Dodge Ram 1500, the 2003–2004 and 2006–2010 Dodge Ram 2500, the 2003–2010 Dodge Ram 3500, and the 2011–2013 Ram 2500 and Ram 3500. Trims named include Laramie, SLT, ST, SXT, Sport, TRX4 and Power Wagon on some entries.

Ram 1500 years after 2008 and the 2005 Dodge Ram 2500 are not on the list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Front shock work affects steering geometry, so have the installation checked afterward by a suspension shop.

What’s included

The protective boot comes with the shock. It carries a Limited Lifetime Warranty.

SKU: RANRS999317 Category:

Specification

Shipping weight 8.80 lbs
Package dimensions 24.10 × 3.30 × 3.10 in
brands

Fitment

VehicleYearsTrims
Dodge Ram 15002006–2008Laramie, SLT, ST, SXT, Sport, TRX4
Dodge Ram 25002003–2004, 2006–2010Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4
Dodge Ram 35002003–2010Laramie, SLT, ST, SXT, Sport, TRX4
Ram 25002011–2013Big Horn, Laramie, Laramie Longhorn, Lone Star, Outdoorsman, Power Wagon, SLT, ST, Tradesman
Ram 35002011–2013Big Horn, Laramie, Laramie Longhorn, Lone Star, SLT, ST, Tradesman

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Rancho RS999317 fit a Dodge Ram 1500?

Yes, for 2006–2008 model years. The manufacturer list gives the Ram 1500 for those years only, so later Ram 1500 years are not covered, and trims such as Laramie and SLT are named.

Is the RS999317 a front or rear shock?

It is a front shock for the front suspension. Its lift rating is w/4 in. Lift, so check that rating against your truck's current front suspension height before installing.

Is the boot included with the shock?

Yes. A protective boot comes with the RS999317 front shock. It also carries a Limited Lifetime Warranty and offers 9-position manual or remote myRide tuning.

What are the brand and part number?

The brand is Rancho and the part number is RS999317, from the RS9000XL series. The UPC is 10039703093177. Dodge Ram fitment is given as a list of model years and trims.

How often should front shocks be checked?

Inspect front shocks at each tire rotation or brake job, and sooner if the truck feels loose on rough roads. Look for leaks, cracked bushings and uneven tire wear. Check the mounts for play before assuming the damper is the cause.

Can a myRide tuning setting replace a worn shock?

No. A tuning setting only changes how firm the damper feels. It cannot restore damping that has worn out, so a shock that leaks or bounces needs replacing even when the tuning is adjusted.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Dodge Ram 2500 Shock Absorbers on Amazon