Overview
The Rancho RS999272 is a gas-charged RS9000XL Series shock absorber and a direct fit for Jeep vehicles. It has a 2.75-in. (70mm) body, an 18mm chrome piston rod and 9-position tuning that you set manually or with the remote.
The UPC is 10039703092729 and the shock carries a Limited Lifetime Warranty. Confirm front or rear position, lift rating and model years with your vehicle before ordering.
Key features
- 9-position myRide tuning, manual or remote
- 18mm chrome piston rod
- Nitrogen gas charged
- Polyurethane bushings
- Liquid metallic finish
- Protective boot included
- Limited Lifetime Warranty
Replacing a worn shock
A worn shock absorber shows up as a bouncy ride, longer stopping distances, body roll in turns and uneven tire wear. Oil residue on the body is a common sign that the internal seal has failed. When replacing one, match the new unit’s mounting points and length to the old one so the suspension geometry stays correct.
Shocks are often replaced in pairs on the same axle to keep handling consistent from side to side. Check the upper and lower mounts, bushings and boots during installation, and replace any cracked or stiff parts. After the first few drives, recheck the mounting bolts and listen for new noises over bumps. Keep the tuning setting consistent on both sides for balanced control.
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999272 |
| UPC | 10039703092729 |
| Shock series | RS9000XL |
| Fitment type | Direct fit |
| Body diameter | 2.75 in. (70mm) |
| Piston rod | 18mm chrome |
| Charge | Gas charged (nitrogen) |
| Tuning | 9-position, manual or remote |
| Bushings | Polyurethane |
| Finish | Liquid metallic |
| Warranty | Limited Lifetime |
Vehicle fitment
Direct fit applies to Jeep vehicles; match year, model and trim first.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One RS999272 shock absorber with a protective boot included.














