Overview
The Prothane Motion Control 19-1712 is a red polyurethane tie rod boot kit that replaces a worn dust boot on a factory tie rod end without replacing the tie rod. The polyurethane is built to resist damage from rocks, sand, water and oils.
Key features
- Red polyurethane construction
- Five-point sealing action that prevents loss of lubricants and contamination
- Resists damage from rocks, sand, water and oils
- Fits the factory tie rod end
- Two boots per package, used as needed
Polyurethane boot care
Polyurethane is firmer than rubber, so a polyurethane boot holds its shape well but can crack if it is bent sharply during installation. Work it onto the joint gently and seat it fully before setting the tie rod jam nut. Keep a spare boot kit on hand if you travel to remote trails.
Off road, the main threats to any tie rod boot are rock strikes, mud packed into the joint, and water crossings that wash grease out. Check the boot after trail use, wipe off grit, and look for splits along the crease where it flexes most. Replace a boot that shows cracks or has lost its seal, since a torn boot lets sand work into the ball joint.
- Inspect boots after each trail outing
- Wipe off mud before it dries inside the joint
- Recheck the tie rod end for play after a damaged boot
Specifications
| Brand | Prothane Motion Control |
|---|---|
| Part number | 19-1712 |
| UPC | 70000423360 |
| Material | Polyurethane |
| Color | Red |
| Quantity | 2 per package |
Vehicle fitment
The kit is sold as universal fit. Match the boot to your factory tie rod end before installing.
Confirm the factory tie rod end matches this boot before installing.
Installation notes
The boot replaces the old one on the existing tie rod end, so no new tie rod is needed, as Prothane describes.
What’s included
Two boots per package.








