Overview
The Energy Suspension 9.13120G is a tie rod dust boot for replacing a rubber boot that has been damaged during disassembly. The boot holds lubricant in and keeps contaminants out of the joint.
Key features
- Replaces the boot without a full tie rod assembly
- Seals out contaminants
- Prevents loss of lubricants
- Universal fit; confirm the tie rod end matches before installation.
Installing a replacement boot
Installation starts with removing the old boot without damaging the tie rod end or the joint seal. Once the old boot is off, wipe the joint clean and look for play, rust or grit that has worked in. A boot cannot protect a joint that is already dry or worn, so the condition of the joint matters as much as the boot.
Fit the new boot over the joint and secure it with the clamp type that matches the old one. Work the joint through its range of motion to confirm the boot sits without twisting or stretching. A torn boot after the first drive usually means it was pinched or stretched during fitting.
- Clean the joint and surrounding area before fitting
- Check that the clamp seats evenly on the boot
- Recheck the boot after the first few drives
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 9.13120G |
| UPC | 703639410713 |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before installation, and check the tie rod end size and design.
Measure the tie rod end size and design before installation.
What’s included
A replacement tie rod dust boot.









