Overview
The Omix-ADA 18048.01 is a tie rod end boot, one boot per unit, for Jeep CJ3, CJ5 and CJ6 models and the Willys CJ-2, CJ-3, CJ-5, CJ-6 and MB entries from 1941 to 1971.
Omix-ADA identifies it as a direct fit part, and each tie rod end that needs a boot requires its own unit.
Key features
- Single tie rod end boot per unit
- Direct fit for CJ3, CJ5 and CJ6 models in the years listed
- Also covers Willys CJ-2 through CJ-6 and MB entries
- Omix-ADA part number 18048.01 with a listed UPC
Boot condition and joint wear
A tie rod end boot is a small part, but it protects a joint that carries steering load on every turn. Dirt that gets past a split boot grinds the ball and socket, and the play that follows changes toe and steering feel. Check the boot for tears, hardening and grease seepage whenever the front end is under the vehicle, since those signs show the boot has stopped doing its job.
Before fitting a new boot, check the tie rod end for movement by hand and look at the grease condition inside the old boot. A joint that is already loose should be addressed first, because a new boot cannot hold back wear that is already there. Seat the boot fully on its groove and keep the joint free of debris during installation.
- Look for tears and grease seepage
- Check the joint for play by hand
- Seat the boot fully on its groove
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 18048.01 |
| UPC | 804314010669 |
| Part type | Tie rod end boot |
| Quantity per unit | One boot |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1959–1960 and 1966 Jeep CJ3, 1959–1960 and 1966–1971 CJ5 and CJ6, Willys CJ-2 (1946–1949), CJ-3 (1949–1958), CJ-5 (1955–1958), CJ-6 (1956–1958) and Willys MB (1941–1942), all in Base trim.
CJ7, Scrambler and Wrangler years are absent from this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the tie rod end for play before fitting the boot, because a worn joint needs attention first.
What’s included
Each unit is one boot. Confirm what arrives in the box matches your installation plan before starting.








