Overview
The Energy Suspension 9.13101G is a black round tie rod dust boot supplied as a 2 pack. It replaces a rubber boot that has been ruined during disassembly, so you replace only the boot instead of the whole tie rod assembly.
The boot is designed to last longer and seal better, keeping out contaminants and helping keep lubricant in. It is a Universal Fit part, so match the taper and socket diameters to your tie rod end.
Key features
- Black finish with round style
- Largest diameter taper 0.59 in./15mm
- Socket top diameter 1 3/8 in./35mm
- Seals out contaminants
- Two boots per pack
Dust boot inspection and care
A dust boot keeps dirt and water out of the tie rod joint and holds grease in place. Once the boot cracks or tears, the joint begins to wear quickly, often without obvious symptoms until play develops. Checking boots during every tire rotation or alignment is a simple way to catch damage early.
When installing a new boot, clean the joint and the surrounding area first so no grit is trapped under the seal. Make sure the boot seats fully in its groove and that the clamp or crimp is secure. Keep the boot free of kinks so it can flex freely with steering movement.
- Clean the joint before fitting the boot
- Seat the boot fully in its groove
- Secure the clamp or crimp
- Check boots at each tire rotation
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 9.13101G |
| UPC | 703639409625 |
| Color | Black |
| Style | Round |
| Largest diameter taper | 0.59 in./15mm |
| Socket top diameter | 1 3/8 in./35mm |
| Quantity | 2 per pack |
| Fitment | Universal Fit |
Vehicle fitment
Universal Fit is stated and no vehicle is named, so match the taper and socket diameters to your tie rod end.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing the boot means taking the tie rod end apart so the damaged boot can come off; check that the 0.59 in./15mm taper matches before fitting the new boot.
What’s included
The pack holds two boots. Check the package contents against your installation, including grease and clamps, before starting.








