Overview
The Prothane Motion Control 19-1714-BL is a replacement tie rod end boot that helps keep dirt and grime out of steering components. It can also add a little visual detail to the vehicle.
It is a replacement boot, so it suits a tie rod end whose original boot is damaged or missing.
Key features
- Replacement tie rod end boot
- Helps keep dirt and grime out of steering components
- Adds a little visual detail to the vehicle.
- Sold as universal fit, so check the boot against your tie rod end first.
Replacing a worn tie rod boot
A tie rod end boot is a flexible cover over the ball joint at the outer end of the steering linkage. Its job is to keep road dirt out and joint grease in. When a boot tears, the joint can run dry in a short time, and grit working into the ball causes looseness and uneven tire wear.
Replacement is usually simplest when the joint is still tight. Before removing the old boot, clean around it and note how it is clamped or seated. Once the new boot is in place, make sure it sits square and is not twisted, then check the steering for smooth movement from lock to lock.
- Inspect the boot at every service
- Look for cracks, splits and grease on the outside
- Check the joint for play after a torn boot
- Replace the boot before it fails on the trail
Specifications
| Brand | Prothane Motion Control |
|---|---|
| Part number | 19-1714-BL |
| UPC | 636169018756 |
Vehicle fitment
Make sure the year, model and trim match your vehicle before ordering. Check the boot against your tie rod end before installing.
Compare the dimensions with the boot being replaced before installing.
Installation notes
Compare the new boot with the existing one before fitting it.
What’s included
Check the quantity against your installation before starting.








