Overview
The Energy Suspension 9.13103G is a black round tie rod dust boot offered as a 2 pack. It replaces a rubber boot that has been ruined during disassembly, which lets you avoid replacing an entire tie rod assembly.
The boot is designed to help prevent loss of lubricants by sealing out contaminants. It is a Universal Fit design with no vehicle named.
Key features
- Black finish, round style
- Largest diameter taper 0.472 in./12mm
- Socket top diameter 1.2 in./30.5mm
- Seals out contaminants
- Two boots per pack
Choosing and fitting a boot
A tie rod boot protects the ball joint inside the tie rod end. Dust and water that get past a split boot can score the joint, and once the grease is gone the joint wears quickly and can develop loose steering. When a boot is ruined during disassembly, replacing only the boot can save the cost of a full assembly, provided the joint itself is still in good shape.
Before fitting, check the joint for play and roughness, and make sure the stud moves freely. A boot is only as good as the seal it makes, so clean the seating surfaces and work in clean grease. Keep the taper and socket dimensions in mind when comparing the new boot with the old one, because a close match matters more than a generous fit.
- Measure the old boot’s taper and socket before ordering
- Inspect the joint for play before fitting
- Wipe the seating surfaces clean before assembly
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 9.13103G |
| UPC | 703639409731 |
| Color | Black |
| Style | Round |
| Largest diameter taper | 0.472 in./12mm |
| Socket top diameter | 1.2 in./30.5mm |
| Quantity | 2 per pack |
| Fitment | Universal Fit |
Vehicle fitment
Energy Suspension labels this boot Universal Fit with no vehicle named; compare the taper and socket top diameters before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The old boot has to come off, which means taking the tie rod end apart. Check that the 0.472 in./12mm taper matches your tie rod end before fitting the new boot.
What’s included
The package holds two boots. Check whether you need grease or clamps before starting the job.









