Overview
The Energy Suspension 9.13119G is a replacement tie rod dust boot for when disassembly has damaged the original rubber boot. The boot seals out contaminants and prevents loss of lubricants.
Key features
- Replacement for rubber boots damaged during disassembly
- Seals out contaminants
- Prevents loss of lubricants
- Replace the boot alone, without a complete tie rod assembly
Why the boot matters
The boot is the only barrier between the ball joint and the road. Inside the tie rod end, grease keeps the ball and socket moving freely, and a boot that has split lets that grease escape while letting grit in. Grit acts like sandpaper, and within a short period a dry, gritty joint can develop play in the steering.
Replacing just the boot is a sensible repair when the joint is still tight. Clean the joint housing before fitting, pack it with fresh grease if the design allows, and seat the new boot evenly so the lip is not folded. Look at the old boot for the cause of the failure, such as a stone strike or a worn seal, and address it.
- Torn boots usually show dried or cracked rubber
- Grease on the outside of the boot points to a leak
- A loose or notchy joint means the tie rod end needs replacing
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 9.13119G |
| UPC | 703639410669 |
Vehicle fitment
Sold as universal fit. Check the tie rod end size before installing.
Match the year, model and trim to your vehicle before ordering. Check the boot against the tie rod end before installing.
What’s included
A replacement tie rod dust boot. Check the package contents against your installation before starting.











