Overview
The Prothane Motion Control 19-1712-BL is a tie rod dust boot kit for replacing a worn boot without replacing the tie rod. Two boots come per package. The boots are designed to resist rocks, sand, water, oils and contamination.
Key features
- Replaces the dust boot without replacing the tie rod
- Resists damage from rocks, sand, water, oils and contamination
- Two boots per package, used as needed
- Universal fit; measure the tie rod end before fitting the boot.
Before you replace a boot
A tie rod boot is a flexible cover that seals the ball joint at the end of the tie rod. Its job is to hold grease in the joint and keep grit, water and road debris out. When the boot splits, the joint starts to lose lubricant and wears faster, and the steering can begin to feel loose or noisy over time.
Replacing only the boot makes sense when the tie rod end still moves smoothly with no play. Before buying, check the joint for looseness, cracks in the old boot and grease that has leaked out. If the ball joint has play, a new boot alone will not restore it, and the tie rod end needs attention.
- Look for torn or hardened rubber around the clamp
- Check for grease residue on the tie rod and nearby steering parts
- Note the boot’s shape before removing the old one
Specifications
| Brand | Prothane Motion Control |
|---|---|
| Part number | 19-1712-BL |
| UPC | 636169018671 |
| Quantity | 2 per package |
Vehicle fitment
No vehicle fitment is listed. The brand’s copy reads universal fit, so check the tie rod end size yourself before fitting the boot.
Measure the tie rod end size and design before installing the boot. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
Two boots per package.









