Overview
The Energy Suspension 9.13101R is a red round tie rod dust boot, packed two to a set, for swapping out a damaged rubber boot on a tie rod end.
The boot covers that job alone, so a full tie rod assembly is not needed when only the rubber boot is damaged. It is designed to seal longer and help keep lubricant in while keeping contaminants out.
Key features
- Red finish
- Round style
- Largest diameter taper 0.59 in./15mm
- Socket top diameter 1 3/8 in./35mm
- Seals out contaminants and helps prevent lubricant loss
Before you buy
A tie rod dust boot is a flexible rubber cover that sits over the joint at the end of the tie rod. Its job is to keep road dirt, water and grit away from the ball joint while holding grease in place. When the boot cracks or tears, the joint can wear faster and steering play may increase over time. Replacing only the boot is often possible when the joint itself is still in good condition, which avoids the cost of a complete tie rod.
Before buying, confirm that the taper and socket top sizes match the tie rod end you are working on, since these dimensions decide whether the boot will seat correctly. Keep the new boot clean during installation and pack it with fresh grease if your joint calls for it. A steering alignment check after the work is a sensible step.
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 9.13101R |
| UPC | 703639409649 |
| Color | Red |
| Style | Round |
| Largest diameter taper | 0.59 in./15mm |
| Socket top diameter | 1 3/8 in./35mm |
| Quantity | 2 per pack |
| Fitment | Universal Fit |
Vehicle fitment
The boot is labeled Universal Fit, and it is not tied to a specific vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing the boot calls for disassembling the tie rod so the old boot can be removed. Match the taper and socket top diameters before reassembling.
What’s included
The pack holds two boots. Check the package contents against your installation before starting.








