Overview
The Bilstein B6 4600 shock absorber conversion kit, part number 46-274021, replaces the Nivomat load leveling rear shock absorbers on the 2002–2006 Cadillac Escalade and the 2000–2006 Chevrolet Tahoe and GMC Yukon. It converts these rear suspensions from Nivomat air leveling to standard coil spring suspension.
Removing the Nivomat damper significantly reduces the rear spring rate, so the kit includes two rear coil springs to restore factory ride height. The two B6 4600 monotube shock absorbers use a velocity sensitive, digressive piston that Bilstein says reacts to changing road conditions for better ride quality, handling and comfort.
Key features
- Monotube shock absorbers with a velocity sensitive, digressive piston
- Two rear coil springs restore factory ride height
- Replaces Nivomat load leveling rear shocks
- Designed for vehicles without electronic suspension
Planning a Nivomat conversion
A Nivomat rear system uses air to hold ride height under load. Converting to coil springs changes that behavior, because the rear height and load response become fixed by the spring rate. Before starting, confirm the vehicle has the rear air system described here and no electronic suspension, since the conversion assumes that setup.
Work on the rear only, and leave the front suspension as it is. Check that the air lines, compressor and leveling valves are disconnected and capped so they do not interfere with the new springs. After installation, look over the headlight aim and the rear tire wear over the next few hundred miles of driving.
- Confirm the vehicle has rear Nivomat air leveling
- Disconnect and cap the air system lines
- Check headlight aim after the conversion
- Recheck fasteners after the first drives
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 46-274021 |
| UPC | 651860804392 |
| Product line | B6 4600 |
| Kit contents | 2 rear coil springs, 2 B6 4600 rear shock absorbers |
| Shock design | Monotube |
| Piston | Velocity sensitive, digressive |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2002–2006 Cadillac Escalade (Base), the 2000–2006 Chevrolet Tahoe (Base, LS, LT, Z71) and the 2000–2006 GMC Yukon (SL, SLE, SLT).
The kit is for vehicles with Nivomat air leveling and without electronic suspension. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a rear kit that replaces the rear Nivomat shock absorbers and adds coil springs, so the front suspension is not part of it. Confirm the vehicle has Nivomat rear air leveling and no electronic suspension before starting.
What’s included
The kit includes two rear coil springs to restore factory ride height and two B6 4600 rear shock absorbers.








