Overview
The Pro Comp 69402 is a Pro Runner upper control arm with oversized stainless steel FK uniball joints. It is designed for lifted, leveled or stock trucks as a replacement for factory upper control arms that have weaker ball joints.
The arms are built from 1-inch chromoly tubing with reinforced pivot bushing mounts. They use large PTMEG pivot bushings fitted with zerk fittings for lubrication. Each arm has a black powder coat finish and a billet machined dust cap that keeps dirt off the uniball.
This item is a complete control arm, so confirm which item is in the box before choosing a fit. Control arms are sized for specific vehicles, so confirm your vehicle’s year, model and suspension before ordering.
Key features
- Stainless steel FK uniball joint
- 1-inch chromoly tubular construction
- PTMEG pivot bushings with zerk fittings
- Black powder coat finish
- Billet machined dust cap
Caring for uniball joints
A uniball joint carries load in every direction, so its condition shows up as wander, clunking or uneven tire wear. Inspect the ball, the dust cap and the boot area each time the tires are off. A torn cap lets grit into the ball, which can wear it faster than the joint is designed to take.
Pivot bushings and joints wear at different rates, and an arm that is replaced often gets new hardware too. Check the mounting bolts, the frame bracket and the bushing sleeves before installing a new arm. Lubricate the zerks as part of routine service, and recheck bolt torque after the first few trail runs.
- Look for play or clunking at the joint
- Check the dust cap for tears or dirt
- Replace worn mounting hardware with the arm
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 69402 |
| Position | Upper |
| Joint | Stainless steel FK uniball |
| Tubing | 1 in chromoly |
| Finish | Black powder coat |
Vehicle fitment
Confirm fit for your vehicle’s year, model and suspension before ordering. Control arms are sized for specific vehicles, so a universal fit should not be assumed.
Installation notes
Control arm replacement changes the suspension geometry, so the arm should be installed with an alignment check afterward. Grease the zerk fittings after installation, as the pivot bushings are designed for it.
What’s included
The upper control arm is the item described above. Compare the arm and its joint against your installation plan before starting.
Not included: the mounting hardware for your vehicle.









