Overview
The Fabtech Upper Control Arm Heim Bearing Ends, part number FABFTS21262, are FK 3/4 in. heim ends for the upper control arms of 2019 to 2021 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks. They reduce control arm deflection and give a solid mounting point to the frame for the arm.
A heim joint is a metal ball and race bearing that pivots in several directions with very little play. Compared with a rubber or urethane bushing, a heim does not flex under load, which is why it is chosen for a firm pivot. The trade-off is that metal joints carry more noise and vibration into the cab than urethane does.
The ends are designed for off-road use. Confirm load ratings and dimensions before ordering.
Key features
- FK 3/4 in. heim ends
- Designed to reduce control arm deflection
- Solid mounting point to the frame for the upper control arm
- Direct fit for 2019 to 2021 Silverado and Sierra 1500 trucks
- Part number FABFTS21262
Heim ends in daily driving
A heim joint pivots in several directions with almost no play, which keeps the arm location firm under hard driving. That firmness is also why the metal joint carries more road shock into the cab and can squeak if it is not kept lubricated. Heim ends suit drivers who value precise control over a quiet cabin, and a truck with stock bushings elsewhere will feel different from one fitted throughout with heims.
Heim ends need periodic inspection. Check for play in the ball, binding when the arm moves, and torn dust boots where the design includes them. Grease fittings, where fitted, should be serviced at regular intervals. Because the arm pivots on a fixed point, misaligned mounts can wear a heim quickly, so set alignment after installation.
- Check for play by hand with the arm supported
- Service grease fittings at regular intervals
- Recheck alignment after the first drive
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABFTS21262 |
| Type | Heim bearing end |
| Size | FK 3/4 in. |
| Purpose | Reduce control arm deflection |
| Fit | Direct fit |
Vehicle fitment
Fabtech lists these heim ends for 2019 to 2021 Chevrolet Silverado 1500 models, including Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST, SSV and WT trims, and 2019 to 2021 GMC Sierra 1500 models, including AT4, Base, Denali, Elevation, SLE and SLT trims.
Silverado and Sierra models outside 2019 to 2021, and other GM trucks, are not in this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Heim ends change the pivot at the arm, so the arm and frame mounts need to match the heim size. Have the work done with the arm fitted to your truck’s mounts, and check the heim size against the arm before assembly.
What’s included
The FK 3/4 in. heim ends. Check the package contents against your installation before starting.






