Overview
The Pro Comp transmission crossmember, part number 91-7738B, is a black front crossmember that supports the transmission on a lifted Ram 1500. It is a front position crossmember designed for the 2012 to 2013 Ram 1500.
A transmission crossmember carries the transmission mount and holds the drivetrain in position after a lift changes its angles. This one was engineered with CAD software for fit, finish and performance. The UPC for this part is 614901034790.
Key features
- Front transmission crossmember
- Black finish
- Fits the 2012 to 2013 Ram 1500
- Engineered with CAD software
Before you install
A transmission crossmember is one of the parts affected when a lift raises the body. As the drivetrain angles change, the transmission can sit lower or tilt differently than it did at stock height, which puts load on the mount and the driveline. A crossmember designed to hold the transmission in the right position keeps those angles within a range the rest of the drivetrain can handle.
Before you buy, confirm the mounting points on your truck match the new crossmember. Look at the bolt holes, the transmission mount and the surrounding frame. Many owners replace the transmount at the same time, and they inspect the driveshaft and the lift’s other components so the whole drivetrain works together.
- Inspect the old transmount for cracks or collapsed rubber
- Check driveline angles after the lift and after the new crossmember is in
- Recheck mounting bolts after the first few trail runs
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 91-7738B |
| UPC | 614901034790 |
| Position | Front |
| Finish | Black |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2012 to 2013 Ram 1500, across the trim levels of those model years. The transmission and mount locations must match these model years.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Support the transmission before removing the old crossmember, and confirm the mounting bolt locations match the new part. Recheck the driveline angles once the transmission is secured.
What’s included
The crossmember is sold alone, with no separate hardware included.







