Overview
The Pro Comp Suspension transmission crossmember brace, part number 91-8020, is a brace for the 6-inch transmission crossmember kit. A brace adds support to a crossmember, which helps it hold its position under load.
This brace is made for the 6-inch transmission crossmember kit. Confirm it matches the crossmember you are installing before ordering.
Key features
- Brace for the 6-inch kit
Before you install the brace
A brace stiffens a crossmember so it resists flex under the weight of the transmission and driveline. Braces work best when they are installed with the crossmember they support, so the two parts should be fitted together and checked for clearance to the frame and exhaust.
Look for loose or missing hardware on the crossmember before adding a brace, since a brace cannot make up for worn mounting points. Check welds and frame rails for cracks, and keep the brace clear of moving parts such as the driveshaft. Re-check the fasteners after the first few drives, because new hardware can settle.
- Clearance to the driveshaft and exhaust
- Condition of the frame mounting points
- Hardware that matches the crossmember kit
- Fastener check after early driving
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 91-8020 |
| UPC | 614901002300 |
| Type | Transmission crossmember brace |
| Kit | 6-inch |
Vehicle fitment
It is made for the 6-inch transmission crossmember kit. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
One crossmember brace is included. Check the package contents for bolts and mounting hardware before starting.







