Select your vehicle

Pro Comp Traction Bar Mounting Kit – 72077B

Pro Comp Suspension

Shop Toyota Tacoma Traction Bar Brackets on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Traction bar mounting kit for the 2007-2016 Toyota Tacoma and 2007-2013 Tundra
  • Includes bushings and sleeves, bolt-on
  • Black finish, sold as a pair
  • Reduces axle wrap when combined with the traction bars

Description

Overview

The Pro Comp 72077B is a traction bar mounting kit with bushings and sleeves, sold as a pair, for the 2007-2016 Toyota Tacoma and the 2007-2013 Toyota Tundra. It has a black finish and a bolt-on application.

Combined with the traction bars, the kit helps reduce axle wrap, which is the twisting of the axle housing under hard acceleration, without restricting suspension articulation. It is a mounting kit only, and the traction bars are a separate product.

Key features

  • Traction bar mounting kit, sold as a pair
  • Includes bushings and sleeves
  • Bolt-on application
  • Black finish
  • Reduces axle wrap without restricting suspension articulation when combined with the traction bars, Pro Comp says

Care after installation

Traction bars work with the axle and frame to control rotation during acceleration and braking. The mounting kit sets how the bars attach, so its bushings and sleeves influence noise, vibration and how the bars move through their travel. Alignment can shift after any work, so plan a check afterward.

Care after installation is mostly routine. Inspect the bushings and sleeves for cracks, flattening or looseness, and check the fasteners for correct tension after the first drives. Look at the brake lines and wiring for chafing, since the bars and axle move together through the full range of travel.

If the truck is used off road, inspect the setup more often. Mud, sand and rock can wear bushings faster than highway driving, and a small loose fastener can grow into a larger problem. Address noise or changed handling promptly rather than waiting for the next service.

Specifications

Brand Pro Comp Suspension
Part number 72077B (also sold as EXP72077B)
UPC 614901118278
Product type Traction bar mounting kit
Finish color Black
Hardware Bushings and sleeves included
Application Bolt-on
Sold as Pair
Fitment type Direct fit

Vehicle fitment

The stored manufacturer fitment list for the Pro Comp 72077B covers the 2007-2016 Toyota Tacoma (Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport, X-Runner) and the 2007-2013 Toyota Tundra (Base, Limited, Platinum, SR5).

Only the years and models above are listed. The 2017 and later Tacoma, the 2014 and later Tundra, and earlier Tacoma and Tundra generations are not included in this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Suspension, steering and axle components are safety-critical, so professional installation is the safer choice. Torque every fastener to the specified value before driving.

  • Support the vehicle on rated jack stands on level ground; never work under a vehicle held only by a jack.
  • Inspect nearby bushings, mounts and hardware while the area is open, and replace anything worn.
  • Re-check fastener torque after the first miles of driving, and again at regular service intervals.
  • Have the alignment checked after any suspension or steering work.
  • Confirm tire, brake line and wiring clearance through the full range of suspension travel before driving normally.

What’s included

A pair of traction bar mounting kits with bushings and sleeves.

Not included: The traction bars themselves, which the kit is designed to be combined with.

SKU: EXP72077B Category:

Specification

Shipping weight 15.00 lbs
Package dimensions 13.00 × 10.00 × 6.00 in
brands

Fitment

VehicleYearsTrims
Toyota Tacoma2007–2016Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport, X-Runner
Toyota Tundra2007–2013Base, Limited, Platinum, SR5

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What trucks does the Pro Comp 72077B fit?

The manufacturer list shows the 2007-2016 Toyota Tacoma and the 2007-2013 Toyota Tundra in the trims listed. Other years are not included, so confirm yours before ordering.

What does the Pro Comp 72077B traction bar mounting kit do?

It reduces axle wrap when combined with the traction bars, without restricting suspension articulation. The kit holds the bars and includes bushings and sleeves.

Are the traction bars included with the 72077B?

No. It is a mounting kit that is combined with the traction bars. The kit includes bushings and sleeves and is sold as a pair.

Is the Pro Comp 72077B a bolt-on kit?

Yes. It is a bolt-on kit with bushings and sleeves included, finished in black and sold as a pair. The traction bars are not part of the kit.

How long do traction bar bushings usually last?

Service life depends on road conditions, how often the truck is used off-road, and how hard it is driven. Bushings wear over time, so check them at regular service intervals and replace any that are cracked, compressed or loose.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota Tacoma Traction Bar Brackets on Amazon