Overview
The Pro Comp Traction Bar Mounting Kit, part number 77182B, is a bolt-on black mounting kit that includes bushings and sleeves. It is sold as a pair and packed as a boxed kit.
The kit is the mounting hardware for Pro Comp traction bars, which Pro Comp says reduce axle wrap without restricting suspension articulation.
Key features
- Bolt-on application
- Includes bushings and sleeves
- Black finish
- Boxed kit sold as a pair
Preparing for installation
Mounting kits like this one are the link between a traction bar and the axle or frame, so their condition affects how the bar performs. Rubber bushings and metal sleeves take the repeated loads of driving, and they age faster on vehicles that see mud, sand and road salt. Clean the mounting surfaces before assembly so the hardware seats evenly.
Good preparation saves time. Lay out the bushings, sleeves and fasteners and compare them with the installation steps before starting. If a bushing looks damaged on arrival, replace it before fitting rather than trying to work around it. A torque wrench helps achieve even clamping, and a second check after a short drive confirms nothing has loosened.
- Clean mounting surfaces before assembly
- Compare hardware with the instructions before starting
- Replace damaged bushings rather than reusing them
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 77182B |
| UPC | 614901109801 |
| Application | Bolt-on |
| Included | Bushings and sleeves |
| Finish | Black |
| Quantity | Pair, boxed |
Vehicle fitment
Fit depends on the year, model and trim of your vehicle, so check those first. Check the mounting points against your axle and frame before fitting the bushings and sleeves.
Installation notes
The kit is bolt-on, so no drilling or welding is required. Confirm the mounting points on your vehicle before fitting the bushings and sleeves.







