Overview
The Pro Comp Traction Bar Mounting Kit, part number 72098B, is a black bolt-on kit for installing aftermarket traction bars on Dodge and Ram heavy-duty pickups. It fits the 2003 to 2010 Dodge Ram 2500 and 3500 and the 2011 to 2012 Ram 2500 and 3500.
The kit includes bushings and sleeves. It can complete the mounting of various aftermarket traction bar kits, as well as home built traction bar units.
Key features
- Bolt-on application
- Includes bushings and sleeves
- Works with various aftermarket traction bar kits
- Black finish
- Sold as a pair
Choosing aftermarket traction bars
Aftermarket traction bars come in many designs, and the mounting hardware needs to match the bar and the axle bracket. A mounting kit with bushings and sleeves helps the bar move as the suspension cycles while still controlling axle rotation.
Heavy-duty pickups like the Ram 2500 and 3500 carry higher loads, so the bars and their mounts see more stress over time. Check that the bar’s rated capacity suits the truck’s use, and avoid stacking extra parts that change the geometry without a plan. Inspect welds and brackets on the axle side at regular service.
Home built traction bar units are sometimes used, but they must be designed with mounts that accept these bushings and sleeves. Measure the bracket spacing and confirm the fit before making any cuts; if the fit is off, the setup can bind or wear quickly.
- Confirm the bar design matches the bushing and sleeve size
- Check bracket spacing before final assembly
- Recheck fasteners after the first highway trip
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 72098B |
| UPC | 614901127362 |
| Finish color | Black |
| Application | Bolt-on |
| Included | Bushings and sleeves |
| Sold as | Pair |
| Fitment label | Direct Fit |
Vehicle fitment
It fits the 2003 to 2010 Dodge Ram 2500 and 3500 and the 2011 to 2012 Ram 2500 and 3500 pickups.
It does not fit Ram 1500 trucks or model years outside 2003 to 2012. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The kit is a bolt-on application, with installation that avoids drilling or welding steps. The traction bar is not included, so confirm the bars you plan to use are designed to mount with this kit.
What’s included
Bushings and sleeves for the traction bar mounts, sold as a pair.
Not included: the aftermarket traction bar. The kit is for mounting one.








