Overview
The Pro Comp Suspension 71200B is a black traction bar mounting kit for Chevrolet Silverado and GMC Sierra trucks, sold as a pair. Combined with traction bars, the kit helps reduce axle wrap while leaving suspension articulation unrestricted.
The kit includes bushings and sleeves and is a bolt-on application. It fits Silverado and Sierra 1500 HD, 2500 and 3500 models. The traction bars are a separate purchase.
Key features
- Reduces axle wrap when used with traction bars
- Leaves suspension articulation unrestricted
- Includes bushings and sleeves
- Bolt-on application
- Black finish
Setting up the traction bars
Axle wrap happens when the axle housing rotates under hard acceleration, lifting one side of the truck and pulling the leaf springs out of alignment. Traction bars run from the axle to the frame to resist that rotation, and the mounting kit is what holds those bars securely at each end.
Articulation matters on a work truck or one used off road. A setup that limits axle travel can cause binding, so after installation, cycle the suspension slowly through its range and watch for contact at the bar ends, bushings and nearby brake lines.
Consider the bar length, mount location and axle housing design together with this kit, and make sure the traction bars you pick are designed to use it. Bushings and sleeves age with heat and dirt, so check them during routine service and replace any that are cracked or loose. Replace the bushings together as a set if one is worn, since the rest will have similar wear.
- Check bushing and sleeve condition at each oil change
- Look for cracks around the axle brackets
- Recheck bolt tightness after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 71200B |
| UPC | 614901108644 |
| Type | Traction bar mounting kit |
| Finish | Black |
| Includes | Bushings and sleeves |
| Application | Bolt-on |
| Sold as | Pair |
| Used with | Traction bars |
Vehicle fitment
It fits the Chevrolet Silverado 1500 HD (2001–2003, 2005–2006), Silverado 1500 HD Classic (2007), Silverado 2500 (1999–2004), Silverado 2500 HD (2001–2010), Silverado 2500 HD Classic (2007), Silverado 3500 (2001–2006), and the matching GMC Sierra 1500 HD, 1500 HD Classic, 2500, 2500 HD, 2500 HD Classic and 3500 models in the same years.
Standard-duty 1500 trucks are not on the list, and neither are Silverado or Sierra models from 2011 onward. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is a bolt-on application with bushings and sleeves included. After installation, check that the traction bars and kit allow full suspension articulation.
What’s included
A traction bar mounting kit with bushings and sleeves, sold as a pair.
Not included: the traction bars, which the kit is designed to work with.








