Overview
The Pro Comp traction bar mounting kit, part number 71182B, is a black bolt-on mount for traction bars. It is sold as a pair and includes bushings and sleeves. It fits 1988 to 1999 K1500 and 1988 to 1998 K2500 trucks.
The kit reduces axle wrap while keeping the suspension free to articulate. It is used together with traction bars, which are not part of the kit.
Key features
- Bolt-on application
- Includes bushings and sleeves
- Black finish
- Designed to reduce axle wrap without restricting articulation
Axle wrap and mounting geometry
Traction bars resist the axle’s rotation under hard acceleration, so the mounts that hold them take a lot of repeated load. Worn bushings or sleeves allow the bar to shift, which can bring back the wrap and clunking the bars were meant to stop. Inspect the mounting points on the frame and axle each time the bars come off, looking for cracks, elongated holes and loose hardware.
Because the mounts sit on the frame, check that the new bushings seat fully and that the bar length still gives full travel. Suspension changes, such as a lift or new tires, can alter the angle of the bars, so recheck clearance and alignment after work is done. Keep a record of torque values so future service is simple.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 71182B |
| UPC | 614901108880 |
| Finish | Black |
| Includes | Bushings and sleeves |
| Application | Bolt-on |
| Quantity | Pair |
Vehicle fitment
It fits 1988 to 1999 Chevrolet K1500, 1988 to 1998 Chevrolet K2500, 1988 to 1999 GMC K1500 and 1988 to 1998 GMC K2500 trucks. For other trucks, confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mounts are a bolt-on application and are used together with traction bars, which are not included.
What’s included
A pair of traction bar mounting kits, each with bushings and sleeves.
Not included: the traction bars.









