Overview
The Pro Comp traction bar mounting kit (part number 72095B) is the bracket set for Pro Comp traction bars on the 2004 to 2013 Ford F-150. The kit holds the traction bars in position on the vehicle, which lets them reduce axle wrap on a lifted truck. It is sold as a pair, bolts on, and comes in black.
Bushings and sleeves for the install are included. It fits the 2004 to 2013 Ford F-150 in several trims, including the XL, XLT, Lariat and FX2 models.
Key features
- Mounting kit for Pro Comp traction bars on the Ford F-150
- Includes bushings and sleeves
- Bolt-on installation
- Black finish
- Sold as a pair
Before you install
Traction bars link the axle to the frame and control how the axle rotates under acceleration and braking. On a lifted truck, the changed geometry can let the axle wind up, which is why these bars are often added. The mounting kit sets where the bars attach, so bar angle and bushing alignment matter as much as the bars themselves.
Before fitting, inspect the frame mounting points for cracks or rust and check that any existing bushings are not worn or split. Fasteners that hold brackets under load should be rechecked after the first few drives and again after hard off-road use. New bushings can make some noise while they settle, which is normal. A clean, level workspace makes alignment easier to check, and trucks used heavily off road benefit from a periodic look at bracket welds and hardware.
- Inspect frame mounting points before fitting
- Recheck fasteners after the first few drives
- Match bar and kit numbers before ordering
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 72095B |
| UPC | 614901109399 |
| Type | Traction bar mounting kit |
| Included | Bushings and sleeves |
| Quantity | Pair |
| Finish | Black |
Vehicle fitment
It fits the 2004 to 2013 Ford F-150 in the FX2, FX4, Harley-Davidson Edition, Lariat, STX, XL and XLT models, along with the 60th Anniversary edition.
The 2014 and later F-150 and the Ford Super Duty trucks are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit bolts on and uses the bushings and sleeves supplied. Use it with the Pro Comp traction bars for the same truck, since the bars are the other half of the setup.
What’s included
A pair of black brackets with bushings and sleeves for the Ford F-150 traction bar setup.









