Overview
The Pro Comp 72083B is a black traction bar mounting kit for Toyota Tacoma trucks from 2005 through 2016. It is designed to reduce axle wrap without restricting suspension articulation when used with traction bars.
The kit includes bushings and sleeves and bolts on. It is sold as a pair. Traction bars are not included, and the kit is used together with them.
Key features
- Reduces axle wrap
- Keeps suspension articulation
- Includes bushings and sleeves
- Bolt-on application
- Black finish
- Sold as a pair
Axle wrap and traction bar setup
Axle wrap happens when a rear axle twists under power, usually on leaf spring setups during hard acceleration. Traction bars limit that rotation, and the mounting points they connect to carry the load. A kit like this helps the bars do their job by keeping the mounting points tight and aligned.
Bushing wear is the most common issue with these setups. Check the bushings and sleeves for cracks, splits or looseness, and look for metal-to-metal contact at the mounts. Bar angle and length also affect how well the system works, so check the bar installation after any ride height change.
After installing the kit and bars, drive a short loop and listen for clunks at the mounts. Re-torque the hardware after the first few drives and inspect the bushings after rough off-road runs.
- Check bushings and sleeves for cracks or looseness
- Look for metal-to-metal contact at the mounts
- Re-torque mounting hardware after the first drives
- Recheck bar angle after a ride height change
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 72083B |
| UPC | 614901109863 |
| Product type | Traction bar mounting kit |
| Finish | Black |
| Includes | Bushings and sleeves |
| Quantity | Pair |
| Installation | Bolt-on |
| Fitment | Direct fit |
Vehicle fitment
It is a direct fit for 2005–2016 Toyota Tacoma trucks.
The list does not include the 1996-1997 Tacoma or the 2017 and later Tacoma. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Install the bushings and sleeves with the mounting kit before attaching the traction bars.
What’s included
A pair of mounting kits, each with bushings and sleeves.
Not included: Traction bars are not included; this kit is used together with them.








