Overview
The Pro Comp Traction Bar Mounting Kit, part number 72096B, is a black mounting kit for Pro Comp traction bars. It includes bushings and sleeves and is sold as a pair. Before ordering, make sure the year, model and trim suit your vehicle.
Pro Comp says traction bars used with this kit reduce axle wrap without restricting suspension articulation.
Key features
- Includes bushings and sleeves
- Black finish
- Sold as a pair
Choosing traction bars to match
Traction bars and their mounting kits work as a pair. The bar carries the forces that the leaf springs or coils would otherwise absorb while the axle moves, so the kit that anchors the bar to the frame and axle matters as much as the bar itself. When shopping, check that the bar length, end-fitting style and bushing type all match the kit’s mounts.
Installation usually calls for careful alignment. Bars with adjustable ends let you set the axle position so the bar is neither overly tight nor slack at ride height. After fitting, cycle the suspension by hand and listen for binding, and recheck fasteners after the first few drives since bushings settle when new.
- Confirm bar length and end style before buying
- Inspect bushings after off-road trips
- Recheck torque on mounting bolts periodically
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 72096B |
| UPC | 61490111048 |
| Included | Bushings and sleeves |
| Finish | Black |
| Quantity | Pair |
Vehicle fitment
Check the year, model and trim against your vehicle before ordering. Match the kit’s mounting points to the traction bar and axle you plan to use, and check that bar’s own fitment as well.
Installation notes
Confirm the kit’s mounting points match your axle and frame before installing the traction bar.









